Replacing the rearview mirror on your 2015 Fusion is a relatively straightforward task that can be completed in a matter of minutes. The new mirror is held in place by a series of clips that can be easily removed with a flathead screwdriver. Once the clips are removed, the old mirror can be pulled straight down and the new mirror can be snapped into place. In this guide, we will provide you with step-by-step instructions on how to replace the rearview mirror on your 2015 Fusion. We will also provide you with some tips on how to choose the right replacement mirror.
Before you begin, you will need to gather a few tools. These tools include a flathead screwdriver, a clean cloth, and a new rearview mirror. Once you have gathered your tools, you can begin the replacement process. First, use the flathead screwdriver to remove the two screws that are located on the bottom of the mirror housing. Once the screws are removed, you can gently pull the mirror housing straight down. Be careful not to pull too hard, as you do not want to damage the wiring harness. Once the mirror housing is removed, you can disconnect the wiring harness from the old mirror. Finally, you can snap the new mirror into place and reassemble the mirror housing. Once the mirror housing is reassembled, you can reinsert the two screws that you removed earlier.
Replacing the rearview mirror on your 2015 Fusion is a quick and easy task that can be completed in a matter of minutes. By following the steps outlined in this guide, you can save yourself the time and expense of taking your car to a mechanic. In addition, by choosing the right replacement mirror, you can improve the safety and functionality of your vehicle.
Introduction to Rear View Mirror Replacement on 2015 Fusion
Mirrors are crucial components of a vehicle’s safety system, providing drivers with a clear view of their surroundings. While rear-view mirrors are generally durable, they can become damaged or lose their functionality over time. If the rear-view mirror on your 2015 Fusion requires replacement, it is important to follow the proper steps to ensure a safe and effective repair.
Before embarking on the mirror replacement process, it is essential to gather the necessary tools and materials. These include a flat-head screwdriver, a Phillips-head screwdriver, and a new rear-view mirror. Additionally, it is recommended to have a clean cloth or microfiber towel on hand for wiping purposes.
Safety should be a top priority throughout the replacement process. Park the vehicle in a well-lit, stable location. Engage the parking brake to prevent any unintended movement. Additionally, it is advisable to disconnect the vehicle’s battery to avoid any electrical hazards. This can be done by locating the battery terminals under the hood and disconnecting the negative terminal using the wrench provided in the vehicle’s toolkit.
Once safety precautions have been taken, proceed with the following steps to replace the rear-view mirror on your 2015 Fusion:
- Remove the Old Mirror:
- Secure the New Mirror:
- Adjust the Mirror:
- Reconnect the Battery:
Disconnecting and Removing the Old Rear View Mirror
1. Locate the small plastic cover piece at the base of the mirror on the inside of the windshield. Use a small flat-head screwdriver or trim removal tool to gently pry the cover off. It may be helpful to use a cloth or towel to protect the windshield from scratches.
2. Once the cover is removed, you will see two screws holding the mirror in place. Use a Phillips head screwdriver to remove the screws.
3. Carefully lift the mirror off the windshield. It may be helpful to have someone assist you with this step to prevent the mirror from falling and breaking.
Preparing the Windshield for the New Mirror
4. Clean the area on the windshield where the new mirror will be installed using a glass cleaner and a clean cloth. Make sure the surface is free of any dirt, debris, or adhesive residue.
5. Apply a thin bead of adhesive to the back of the new mirror, following the manufacturer’s instructions. Note that some mirrors may come with pre-applied adhesive.
Positioning the New Mirror on the Windshield
6. Carefully align the new mirror on the windshield, ensuring that it is centered and level. Press down firmly on the mirror to secure it in place.
7. Hold the mirror in place for several minutes to allow the adhesive to set. Do not adjust or move the mirror during this time.
8. Once the adhesive has set, reattach the small plastic cover piece at the base of the mirror. Press down firmly to secure it.
Testing the New Rear View Mirror
9. Adjust the new mirror to your desired position by moving it up, down, left, or right. Make sure the mirror provides you with a clear and unobstructed view behind your vehicle.
10. Drive your vehicle for a short distance to ensure that the mirror is securely attached and provides you with the necessary visibility.
| Tools Required | Description |
|---|---|
| Phillips head screwdriver | Used to remove the screws holding the old mirror in place |
| Small flat-head screwdriver or trim removal tool | Used to pry off the small plastic cover piece at the base of the old mirror |
| Glass cleaner | Used to clean the windshield area where the new mirror will be installed |
| Clean cloth | Used to clean the windshield area and remove any adhesive residue |
| Adhesive | Used to secure the new mirror to the windshield |
Maintaining and Cleaning the Rear View Mirror
Maintaining and cleaning your rear view mirror is an important part of keeping your car in good condition. A dirty or damaged mirror can make it difficult to see behind you while driving, which can be dangerous. Here are some tips on how to maintain and clean your rear view mirror:
Cleaning the Rear View Mirror
Cleaning your rear view mirror is a simple process that can be done with a few household items. Here are the steps on how to clean your rear view mirror:
1. Gather your supplies.
You will need:
- A clean microfiber cloth
- A glass cleaner
- A bowl of warm water
2. Wet the cloth with the glass cleaner.
Do not apply the glass cleaner directly to the mirror, as this can damage the coating. Instead, wet a microfiber cloth with the glass cleaner and then wipe the mirror.
3. Wipe the mirror in a circular motion.
Start in the center of the mirror and work your way outward in a circular motion. Be sure to apply even pressure so that you do not scratch the mirror.
4. Rinse the mirror with water.
Once you have wiped the mirror with the glass cleaner, rinse it with water to remove any residue. You can do this by dipping a clean microfiber cloth in a bowl of warm water and then wiping the mirror.
5. Dry the mirror with a clean cloth.
Use a clean microfiber cloth to dry the mirror. Be sure to dry the mirror thoroughly to prevent streaks.
Maintaining the Rear View Mirror
In addition to cleaning your rear view mirror, you should also maintain it to keep it in good condition. Here are some tips on how to maintain your rear view mirror:
1. Inspect the mirror regularly.
Check the mirror for any cracks, scratches, or other damage. If you find any damage, you should have the mirror replaced as soon as possible.
2. Tighten the screws that hold the mirror in place.
Over time, the screws that hold the mirror in place can become loose. This can cause the mirror to wobble or move around while you are driving. To prevent this, check the screws regularly and tighten them if necessary.
3. Clean the mirror bracket.
The mirror bracket is the part of the mirror that attaches it to the windshield. Over time, the bracket can become dirty or corroded. This can cause the mirror to loosen or fall off. To prevent this, clean the mirror bracket regularly with a mild detergent and water.
4. Lubricate the mirror pivot point.
The mirror pivot point is the part of the mirror that allows it to be adjusted. Over time, the pivot point can become dry and stiff. This can make it difficult to adjust the mirror. To prevent this, lubricate the pivot point regularly with a light oil.
5. Replace the mirror if necessary.
If your rear view mirror is damaged or cannot be repaired, you should replace it as soon as possible. A damaged mirror can be dangerous, as it can make it difficult to see behind you while driving.
By following these tips, you can keep your rear view mirror in good condition and ensure that you can always see clearly behind you while driving.
Additional Tips
Here are some additional tips for maintaining and cleaning your rear view mirror:
- Do not use harsh chemicals or abrasive cleaners on your rear view mirror. These cleaners can damage the coating on the mirror and make it more susceptible to scratches.
- Do not use a paper towel to clean your rear view mirror. Paper towels can scratch the mirror.
- If your rear view mirror is heavily soiled, you may need to use a commercial glass cleaner. Be sure to follow the instructions on the cleaner carefully.
- If you have any questions about how to maintain or clean your rear view mirror, consult your vehicle’s owner’s manual.
Signs of a Damaged or Faulty Mirror
1. Visible Damage
The most obvious sign of a damaged or faulty mirror is visible damage. This can include cracks, chips, or scratches. If the damage is severe, it may impair your visibility while driving.
2. Loose or Shaky Mirror
A loose or shaky mirror can be a safety hazard. It can vibrate or move while you’re driving, making it difficult to see clearly. A loose mirror can also fall off completely, which can be dangerous.
3. Discolored or Faded Mirror
Over time, the mirror on your car can become discolored or faded. This can make it difficult to see clearly, especially at night. Discoloration or fading can also be a sign of a more serious problem, such as water damage.
4. Dimming or Flickering Mirror
If your mirror is dimming or flickering, it may be a sign of an electrical problem. This can be a safety hazard, as it can make it difficult to see clearly. Dimming or flickering mirrors should be replaced as soon as possible.
5. Scratched or Etched Mirror
Scratches or etching on the mirror can impair your visibility while driving. Scratches can be caused by a variety of things, such as keys, jewelry, or cleaning products. Etching can be caused by exposure to harsh chemicals or acids.
6. Blind Spots
If your mirror has blind spots, it can make it difficult to see other vehicles or pedestrians. Blind spots can be caused by the mirror’s size, shape, or position. If you have blind spots in your mirror, you should consider replacing it with a larger or differently shaped mirror.
7. Poor Nighttime Visibility
If you have difficulty seeing at night with your mirror, it may be a sign that the mirror is not reflecting light properly. Poor nighttime visibility can be caused by a dirty or damaged mirror, or by a problem with the mirror’s coating.
8. Cracked or Broken Glass
Cracked or broken glass on the mirror is a safety hazard. It can shatter and cause injury if you’re involved in an accident. Cracked or broken mirrors should be replaced immediately.
9. Disconnected Wires
If the wires that connect the mirror to the vehicle’s electrical system are disconnected, the mirror will not work properly. Disconnected wires can be caused by a variety of things, such as accidents, vandalism, or repairs. If you suspect that the wires to your mirror are disconnected, you should have them checked by a qualified technician.
10. Failed Electronics
The mirror on your car contains a variety of electronic components, such as motors, sensors, and lights. If any of these components fail, the mirror will not work properly. Failed electronics can be caused by a variety of things, such as power surges, water damage, or manufacturing defects. If you suspect that the electronics in your mirror have failed, you should have it checked by a qualified technician.
Identifying and Resolving Electrical Issues
Electrical issues with the rear view mirror are typically caused by:
1. Damaged Wires:
Inspect the wires that run from the mirror to the vehicle’s wiring harness. If there are any breaks, cuts, or exposed wires, this can cause electrical problems.
2. Loose Connections:
Check the electrical connections between the mirror and the wiring harness. Ensure that all connections are secure and properly plugged in.
3. Faulty Mirror Module:
The mirror module itself may malfunction, leading to electrical issues. This can be diagnosed by testing the mirror module with a voltmeter.
4. Incorrect Electrical Configuration:
If the mirror was replaced or installed incorrectly, the electrical connections may be improperly configured. Verify that the wiring is connected in accordance with the vehicle’s electrical diagram.
5. Software Issues:
In vehicles equipped with advanced features, software glitches can affect the mirror’s electrical operation. Consider updating the vehicle’s software or resetting the mirror to its default settings.
6. Corroded Terminals:
Electrical terminals can corrode over time, leading to poor contact and electrical issues. Clean any corroded terminals with a wire brush or electrical contact cleaner.
7. Grounding Issues:
The mirror’s grounding point may be faulty or loose. Ensure that the grounding wire is properly connected and that the contact point is clean.
8. Faulty Switches:
If the mirror features adjustable controls or switches, these may fail, causing electrical problems. Test the switches using a multimeter to identify any malfunctions.
9. Blown Fuses:
Electrical issues can also be caused by blown fuses. Check the fuse box and replace any blown fuses related to the mirror’s electrical circuit.
10. Electrical Short Circuits:
Electrical short circuits can occur when wires come into contact with each other or with the vehicle’s metal frame. Inspect the wiring harness and identify any areas where wires may have crossed or become damaged.
Troubleshooting Table:
| Symptom | Possible Cause | Solution |
|---|---|---|
| No power to mirror | Damaged wires | Repair or replace damaged wires |
| Intermittent electrical issues | Loose connections | Secure electrical connections |
| Mirror features not working | Faulty mirror module | Replace mirror module |
| Incorrect mirror adjustments | Software issues | Update vehicle software or reset mirror settings |
| Mirror controls not working | Faulty switches | Replace faulty switches |
How to Replace Rear View Mirror on 2015 Fusion
Replacing the rear view mirror on a 2015 Ford Fusion is a relatively simple task. You will need a new mirror, a small flathead screwdriver, and a Phillips screwdriver.
1. Position the screwdriver in the small notch at the bottom of the mirror housing. Gently pry the mirror housing away from the windshield.
2. Locate the wire connector at the back of the mirror. Disconnect the connector by pressing on the tab and pulling it straight out.
3. Remove the two screws that hold the mirror to the housing.
4. Install the new mirror by reversing the steps above.
## People Also Ask
### How do I remove the rear view mirror on my 2015 Fusion?
To remove the rear view mirror on a 2015 Fusion, you will need a small flathead screwdriver and a Phillips screwdriver. Position the screwdriver in the small notch at the bottom of the mirror housing. Gently pry the mirror housing away from the windshield.
### How do I connect the wires to the new rear view mirror?
Locate the wire connector at the back of the new mirror. Connect the connector to the wire harness in the vehicle by pressing on the tab and pushing it straight in.
### How do I tighten the screws on the new rear view mirror?
Tighten the screws on the new rear view mirror using a Phillips screwdriver. Do not overtighten the screws.
