Embarking on the disassembly of your Harley Trike’s reverse motor may seem like a formidable task, but with the right guidance and a methodical approach, you can navigate this process with ease. This comprehensive guide will provide you with a step-by-step roadmap, empowering you to remove the reverse motor efficiently and safely.
Firstly, it is crucial to emphasize that attempting this procedure without a thorough understanding of the Trike’s mechanical systems could lead to complications. Therefore, if you are not confident in your abilities, it is highly advisable to seek the assistance of a qualified mechanic. Safety should be paramount throughout the entire process. Ensure that your Trike is parked on a level surface, the parking brake is engaged, and the battery is disconnected to prevent any accidental electrical hazards.
Before embarking on the removal process, familiarize yourself with the location of the reverse motor. It is typically situated beneath the Trike’s transmission, mounted on a bracket. Once you have identified the motor, proceed to disconnect all electrical connections and cables associated with it. Take note of the wiring configuration and label the wires to facilitate reassembly later. Next, locate the bolts securing the motor to the bracket and remove them carefully. Once the motor is detached from the bracket, gently lift it out of the Trike’s frame, taking care not to damage any surrounding components.
Safety Precautions for Removing Reverse Motor
1. Disconnect the Battery
Before beginning any work on the reverse motor, it is crucial to disconnect the battery to prevent any potential electrical accidents. To do this:
– Locate the battery, typically situated beneath the seat or in the storage compartment behind the driver.
– Identify the negative terminal, which is usually marked with a black wire.
– Loosen the nut or bolt securing the negative battery cable using a wrench or socket.
– Lift the negative battery cable away from the terminal and secure it so that it cannot make contact.
1.1 Battery Location and Negative Terminal Identification:
| Motorcycle Model | Battery Location | Negative Terminal Color |
|---|---|---|
| Harley-Davidson Electra Glide | Underneath the seat | Black |
| Harley-Davidson Road King | Storage compartment behind the driver | Black |
| Harley-Davidson Street Glide | Storage compartment behind the driver | Black |
1.2 Proper Disconnection Technique:
– Use a wrench or socket that fits the size of the nut or bolt securing the negative battery cable.
– Apply gentle force to loosen the connection, ensuring not to overtighten or damage the cable.
– After loosening the connection, carefully lift the negative battery cable away from the terminal.
– For extra safety, secure the cable using a bungee cord or zip tie to prevent accidental contact with the terminal.
2. Safety Gear
When working on the reverse motor, it is essential to wear appropriate safety gear to protect yourself from potential hazards:
– Gloves: Wear heavy-duty work gloves to protect your hands from cuts, scrapes, and heat.
– Safety glasses: Wear safety glasses to shield your eyes from flying debris or chemicals.
– Earplugs: Wear earplugs to minimize noise exposure during the removal process.
– Respirator: If working in a poorly ventilated area, wear a respirator to prevent inhaling harmful fumes.
How To Remove Reverse Motor On Harley Trike
**Tools Required:**
- Socket wrench
- Wrench
- Pliers
**Safety Precautions:**
- Disconnect the negative battery terminal before starting.
- Wear safety glasses and gloves.
**Instructions:**
- Locate the reverse motor on the left side of the trike, near the front wheel.
- Disconnect the electrical connector from the reverse motor.
- Use a wrench to loosen the bolts that secure the reverse motor to the trike frame.
- Use a socket wrench to remove the nuts that secure the reverse motor to the transmission.
- Carefully remove the reverse motor from the trike.
**Reinstallation:**
- Place the reverse motor in position on the trike frame.
- Secure the reverse motor to the transmission with the nuts.
- Secure the reverse motor to the trike frame with the bolts.
- Connect the electrical connector to the reverse motor.
- Reconnect the negative battery terminal.
People Also Ask
How do I know if my Harley trike reverse motor is bad?
Some symptoms of a bad reverse motor include:
- The reverse motor does not engage when the reverse gear is selected.
- The reverse motor makes a grinding noise when it is engaged.
- The reverse motor overheats.
How much does it cost to replace a Harley trike reverse motor?
The cost to replace a Harley trike reverse motor can vary depending on the make and model of the trike, as well as the labor rates in your area. However, you can expect to pay between $500 and $1,500 for parts and labor.
Is it difficult to remove a Harley trike reverse motor?
Removing a Harley trike reverse motor is not a difficult task, but it does require some mechanical skills and tools. If you are not comfortable working on your trike, it is best to have a qualified mechanic perform the repair.
