Your Chevy Tahoe is a rugged and stylish SUV, and the window trim is an important part of its overall appearance. If your window trim is damaged or faded, it can make your Tahoe look old and unkempt. Replacing the window trim is a relatively easy and inexpensive way to improve the look of your Tahoe and make it look like new again. In this article, we’ll show you how to replace the window trim on a 2015 Chevy Tahoe in just a few simple steps.
The first step is to remove the old window trim. To do this, you’ll need to use a flathead screwdriver to pry the trim away from the window. Be careful not to damage the window or the trim when you’re doing this. Once the trim is loose, you can pull it off by hand.
Next, you’ll need to clean the area where the new trim will be installed. Use a damp cloth to remove any dirt or debris. Once the area is clean, you can apply the new trim. To do this, simply peel off the backing of the trim and press it into place. Make sure to press firmly so that the trim adheres properly. Once the trim is in place, you’re all done! Your Tahoe will now look like new again.
Preparing the Window for New Trim Installation
Removing the Old Trim
- Gather your tools: You will need a screwdriver, a pry bar, and a new window trim kit.
- Park the Tahoe in a well-lit area: This will make it easier to see what you are doing.
- Roll down the window: This will give you access to the window trim.
- Locate the screws that hold the trim in place: There will be two screws on each side of the window.
- Remove the screws: Use the screwdriver to remove the screws.
- Gently pry the trim loose: Use the pry bar to gently pry the trim loose from the window.
- Remove the trim: Once the trim is loose, you can remove it from the window.
Cleaning the Window
- Wipe down the window with a clean cloth: This will remove any dirt or debris from the window.
- Apply a window cleaner to the window: Use a window cleaner that is specifically designed for automotive windows.
- Wipe down the window with a clean cloth: This will remove the window cleaner and leave the window sparkling clean.
Applying the New Trim
- Apply a thin bead of adhesive to the back of the new trim: Use a silicone-based adhesive that is specifically designed for automotive applications.
- Position the new trim on the window: Line up the trim with the edge of the window and press it into place.
- Screw the trim into place: Use the screwdriver to screw the trim into place.
- Repeat steps 2 and 3 for the other side of the window: Once the trim is installed on one side of the window, repeat steps 2 and 3 for the other side of the window.
- Allow the adhesive to dry: Allow the adhesive to dry for 24 hours before driving the Tahoe.
| Tools Needed |
|---|
| Screwdriver |
| Pry bar |
| New window trim kit |
| Safety Precautions |
|---|
| Wear safety glasses when using the pry bar. |
| Be careful not to scratch the window when removing the old trim. |
| Allow the adhesive to dry for 24 hours before driving the Tahoe. |
How To Replace 2015 Chevy Tahoe Window Trim
Replacing the window trim on a 2015 Chevy Tahoe is a relatively simple process that can be completed in about an hour. By following these simple steps, you can have your Tahoe looking new again in no time.
- Remove the door panel. To do this, you will need to remove the screws that are located around the perimeter of the door panel. Once the screws are removed, you can gently pry the door panel off of the door.
- Disconnect the electrical connectors. Once the door panel is removed, you will need to disconnect the electrical connectors that are attached to the window trim. To do this, simply squeeze the release tabs on the connectors and pull them apart.
- Remove the old window trim. Once the electrical connectors are disconnected, you can remove the old window trim by gently pulling it away from the door. Be careful not to damage the paint on the door when removing the trim.
- Install the new window trim. To install the new window trim, simply align it with the holes in the door and snap it into place. Be sure to connect the electrical connectors before reinstalling the door panel.
