Add Tracking to CapCut Overlay for Precise Customization

Enable Tracking in CapCut

1. Open a Project in CapCut

To start, open the CapCut app on your mobile device. Once the app is open, tap on the “New Project” button to create a new video project. You can also import an existing video project by tapping on the “Import” button.

Project Settings

Adjust the project settings to ensure the correct dimensions and frame rate for your video. Tap on the “Settings” icon in the lower-right corner of the screen to access the project settings.

Import Media

Next, import the video footage and image or text you want to add as an overlay. Tap on the “Add” button in the bottom menu and select “Videos” or “Images” to import your media. Once imported, drag and drop the media onto the timeline below.

Add a New Overlay

To create an overlay, select the video clip on the timeline and tap on the “Overlays” button in the bottom menu. From the overlay menu, select “Add Overlay” and choose either “Video” or “Image” to add the desired overlay.

Edit the Overlay

After adding the overlay, you can customize its appearance by adjusting the position, size, and rotation using the handles on the preview pane. You can also add effects or filters to the overlay by tapping on the “Effects” or “Filters” buttons in the bottom menu.

2. Enable Tracking for the Overlay

To enable tracking for your overlay, follow these steps:

Select the overlay layer on the timeline.
Tap on the “Motion” tab in the toolbar at the bottom of the screen.
Under the “Tracking” section, tap on the “Enable” toggle to enable tracking for the overlay.

3. Select Tracking Points

Once tracking is enabled, you need to select tracking points to specify how the overlay will move in relation to the underlying video. Tap on the “Tracking” icon in the toolbar and select the “Manual” option.

Move the playhead to the desired frame where you want to start tracking the overlay. Then, tap on the “Add Point” button in the toolbar to add a tracking point. You can add multiple tracking points throughout the video to create a smooth tracking movement.

4. Adjust Tracking Parameters

After adding tracking points, you can fine-tune the tracking parameters to ensure accurate movement of the overlay:

Parameter	Description
Scale	Adjusts the size of the overlay relative to the tracking points.
Rotation	Rotates the overlay around the tracking points.
Perspective	Adds a 3D perspective to the overlay, making it appear to move realistically.

Apply Tracking to the Overlay

Tracking allows you to control the movement of your overlay over time. This can be used to create a variety of effects, such as having the overlay move across the screen, follow an object, or zoom in and out. To apply tracking to your overlay, follow these steps:

Select the overlay you want to track.
Tap on the “Edit” icon in the bottom right corner of the screen.
Tap on the “Tracking” tab in the top menu bar.

Customizing Tracking Settings

The Tracking tab contains a variety of settings that you can use to customize the movement of your overlay. These settings include:

Mode: This setting determines the type of tracking that will be applied to your overlay. There are three different modes to choose from:

Motion Tracking: This mode allows you to track the movement of an object in your video and have the overlay follow it.
Path Tracking: This mode allows you to create a custom path for the overlay to follow.
Camera Tracking: This mode allows you to track the movement of the camera and have the overlay move accordingly.

Target: This setting determines what the overlay will track. If you are using Motion Tracking, you can select an object in your video for the overlay to track. If you are using Path Tracking, you can create a custom path for the overlay to follow. If you are using Camera Tracking, the overlay will track the movement of the camera.
Position: This setting allows you to set the position of the overlay relative to the target. You can use this setting to offset the overlay from the target or to have it move in a specific direction.
Scale: This setting allows you to set the scale of the overlay relative to the target. You can use this setting to make the overlay larger or smaller than the target.
Rotation: This setting allows you to set the rotation of the overlay relative to the target. You can use this setting to rotate the overlay around the target or to have it follow the target’s rotation.
Speed: This setting allows you to set the speed of the overlay’s movement. You can use this setting to make the overlay move faster or slower.
Easing: This setting allows you to control the acceleration and deceleration of the overlay’s movement. You can choose from a variety of easing curves to create different types of movement.

Creating Custom Paths

If you are using Path Tracking, you can create a custom path for the overlay to follow. To do this, tap on the “Add Path” button in the bottom right corner of the Tracking tab. You can then use your finger to draw a path on the screen. The overlay will follow the path that you have drawn.

Saving and Loading Tracking Presets

You can save and load tracking presets to reuse them on other projects. To save a preset, tap on the “Save Preset” button in the bottom right corner of the Tracking tab. You can then enter a name for the preset and tap on the “Save” button. To load a preset, tap on the “Load Preset” button in the bottom right corner of the Tracking tab. You can then select the preset that you want to load from the list of available presets.

Align the Overlay with the Subject

CapCut offers precise alignment options to perfectly align your overlay with the subject, ensuring a seamless integration between the two elements. To achieve this, follow the steps below:

1. Select the Overlay

Open the CapCut video editor and import your video and overlay. Drag and drop the overlay onto the video timeline.

2. Activate Tracking

Select the overlay layer and tap the “Tracking” button on the bottom toolbar. This will activate the tracking feature.

3. Set Keyframe

Position the cursor at the starting point where you want the overlay to track the subject. Tap the “Set Keyframe” button to create a keyframe that marks the initial position.

4. Track the Subject

CapCut’s AI engine will automatically track the subject in your video. If necessary, you can manually adjust the tracking by dragging the overlay’s position over the subject.

5. Fine-Tune Alignment

The “Position” panel on the left provides fine-tuning options for precise alignment. Adjust the “X” and “Y” coordinates to precisely position the overlay over the subject.

6. Refine Tracking

CapCut offers advanced tracking features to enhance accuracy. In the “Tracking” panel, you can customize tracking parameters such as the “Tracking Sensitivity” and “Tracking Speed,” allowing you to fine-tune the overlay’s movement based on the subject’s speed and direction.

Additionally, you can use the “Bezier Curve” option to manually create tracking curves, providing greater control over the overlay’s path.

The following table summarizes the advanced tracking parameters and their descriptions:

Parameter	Description
Tracking Sensitivity	Adjusts the sensitivity of the tracking, reducing jitter or overcorrection.
Tracking Speed	Controls the speed at which the overlay tracks the subject, providing smoother movement.
Bezier Curve	Allows manual creation of custom tracking paths for complex subject movements.

By utilizing these advanced tracking features, you can achieve precise alignment of your overlay with the subject, resulting in a natural and immersive visual effect.

Adjust Tracking Intensity

The tracking intensity determines how strongly the overlay follows the movement of the target object. Adjust this setting to achieve the desired level of tracking accuracy and smoothness.

To adjust tracking intensity:

1. Select the overlay you want to adjust.
2. Tap on the “Tracking” tab in the overlay menu.
3. Use the slider to increase or decrease the tracking intensity.

Higher intensity values result in a more responsive and precise tracking, while lower values give a smoother but potentially less accurate tracking.

Here’s a table summarizing the effects of different tracking intensity levels:

Intensity	Effect
Low	Smoother tracking, but less responsive to target movements.
Medium	Balanced tracking, providing both responsiveness and smoothness.
High	Very responsive and precise tracking, but may jitter if the target movement is too fast.

The optimal tracking intensity depends on the specific overlay and the target object’s movement pattern. Experiment with different settings to find the one that best suits your needs.

Tips for Adjusting Tracking Intensity

* For overlays with small, subtle movements, use a low or medium intensity level to prevent jitter.
* For overlays with large, fast movements, use a high intensity level to ensure accurate tracking.
* If the overlay is tracking the wrong object, try decreasing the tracking intensity to reduce interference from other moving objects in the frame.
* If the overlay is not tracking smoothly, try increasing the tracking intensity to improve responsiveness.
* Remember, tracking intensity is a delicate setting that requires fine-tuning to achieve the best results. Experiment with different values and observe how they affect the overlay’s behavior.

Create a Smooth Tracking Transition

To ensure a smooth tracking transition in your CapCut overlay, follow these steps carefully:

Import Your Footage and Overlay:
Import the base footage and overlay element you want to track into CapCut.
Select the Overlay:
Tap on the overlay in the timeline to select it.
Open the Tracking Panel:
Tap the "Tracking" icon in the bottom toolbar. This will open the tracking panel.
Set Keyframes for Starting Point:
Place the vertical playhead at the frame where you want the overlay to start being tracked. Tap the "Set Keyframe" button to mark this point as a "Track Start" keyframe.
Choose the Tracking Mode:
Select the desired tracking mode from the options available: Manual, Position, or Scale & Position. For a smooth transition, we’ll use "Position."
Set Keyframes for Ending Point:
Move the vertical playhead to the frame where you want the tracking to end. Tap the "Set Keyframe" button to mark this point as a "Track End" keyframe.
Adjust Tracking Parameters:
Use the "Smoothness" slider to adjust the smoothness of the overlay’s movement. A higher smoothness value results in smoother tracking.
Fine-Tune the Position:
Tap on the "Position" icon within the tracking panel. This will allow you to manually adjust the position of the overlay at any point during the tracking segment.
Add Additional Keyframes (Optional):
If necessary, you can add additional keyframes within the tracking segment to customize the overlay’s trajectory.
Preview the Transition:
Tap the play button above the timeline to preview the smooth tracking transition.

Control Overlay Size with Tracking

To adjust the size of your CapCut overlay with tracking, follow these steps:

1. Select the overlay layer you want to adjust in the timeline.

2. Tap on the “Transform” icon in the bottom toolbar.

3. Adjust the “Scale” value to increase or decrease the size of the overlay. You can also drag the corners of the overlay to resize it manually.

4. To constrain the proportions of the overlay, toggle the “Lock Aspect Ratio” icon in the bottom toolbar.

5. To apply tracking to the overlay, tap on the “Motion” tab in the bottom toolbar.

6. Adjust the “Position” value to move the overlay around the screen.

7. To create a tracking effect, adjust the “Rotation” value to rotate the overlay around its center point.

8. To add a tracking effect to the overlay’s scale, tap on the “Scale” tab in the bottom toolbar.

9. Adjust the “Keyframes” value to create a curve that controls the overlay’s scale over time. You can drag the keyframes to adjust the timing and position of the scale changes.

10. To add a tracking effect to the overlay’s opacity, tap on the “Opacity” tab in the bottom toolbar.

11. Adjust the “Keyframes” value to create a curve that controls the overlay’s opacity over time. You can drag the keyframes to adjust the timing and position of the opacity changes.

Advanced Tracking

For more advanced tracking options, you can use the “Advanced Tracking” feature in CapCut.

1. Tap on the “Advanced Tracking” icon in the bottom toolbar.

2. A new panel will open with the following options:

Target: Select the target object you want the overlay to track.
Motion Type: Choose the type of tracking you want to apply (e.g., Smooth, Linear, or Custom).
Keyframes: Adjust the keyframes to fine-tune the tracking.

3. Tap on the “Apply” button to apply the advanced tracking settings.

Tips for Tracking

Here are a few tips for using tracking in CapCut:

Use high-contrast colors and clear edges for the target object to ensure accurate tracking.
Adjust the tracking keyframes manually to fine-tune the motion of the overlay.
Use advanced tracking options to create complex tracking effects.

Animate the Overlay with Tracking

Step 1: Create an Overlay

Begin by adding an image or text layer to serve as the overlay. Adjust its size and position as desired.

Step 2: Open the Keyframe Menu

Select the overlay and tap the “Transform” option in the edit panel. Next, click the stopwatch icon next to “Position” to create a keyframe.

Step 3: Use Motion Tracking Tool

In the preview window, locate the object or feature you want the overlay to follow. Tap the “Motion Tracking” icon in the toolbar.

Step 4: Select Tracking Points

Draw a rectangle around the area you want to track. Adjust the points to precisely define the object’s location.

Step 5: Adjust Tracking Settings

Customize the tracking parameters such as “Size” to scale the overlay relative to the tracked object and “Rotation” to rotate it accordingly.

Step 6: Create Multiple Keyframes

Repeat creating keyframes along the motion path. This will ensure smooth tracking.

Step 7: Fine-Tune Keyframes

Use the blue handles on the keyframes to adjust the overlay’s position and orientation. Play the preview to check the tracking accuracy.

Step 8: Add Additional Effects

Consider adding effects such as motion blur or fade in/out transitions to enhance the tracking animation.

Step 9: Preview and Export

Play the edited video to verify the overlay’s tracking. Once satisfied, export the video in the desired format.

Advanced Tracking Options

Step 10: Customize Tracking Mode

Choose from three tracking modes: “Frame,” “Feature,” and “Pixel.” Each mode offers varying levels of precision and stability.

Step 11: Adjust Search Area

Define the area where CapCut will search for tracking points. A smaller area provides more accuracy but limits flexibility.

Step 12: Set Stabilization

Enable stabilization to reduce jitter and maintain a smooth tracking motion, especially for shaky footage.

Step 13: Use Masking

Create a mask around the tracked object to prevent the overlay from moving outside the specified region.

Step 14: Track Multiple Objects

With the “Multi-Target” tracking mode, you can track multiple objects or areas simultaneously.

Step 15: Advanced Keyframe Control

Right-click keyframes to access additional options, such as adjusting easing curves for smoother transitions.

Troubleshooting Tips

Step 16: Insufficient Tracking Points

Increase the size of the tracking rectangle or adjust the search area to ensure enough tracking points.

Step 17: Tracking Inaccuracy

Check if the tracked object is sufficiently distinct from the background. Consider using a different tracking mode or adjusting the rotation settings.

Add Motion to Static Overlays

CapCut offers a variety of ways to add motion to static overlays, allowing you to create more dynamic and engaging videos. Here are a few methods to achieve this:

1. Keyframe Animation

Keyframe animation lets you control the position, scale, rotation, and opacity of an overlay over time. To use keyframe animation:

Select the overlay layer in the timeline.
Tap on the “Animation” icon at the bottom of the screen.
Choose the “Keyframe” option.
Tap on the timeline to create keyframes. Each keyframe represents a point in time where you can adjust the overlay’s properties.
Drag the keyframes to change the overlay’s properties over time.

2. Motion Blur

Motion blur simulates the effect of movement by blurring the edges of an object. To add motion blur to an overlay:

Select the overlay layer in the timeline.
Tap on the “Effects” icon at the bottom of the screen.
Choose the “Motion Blur” effect.
Adjust the settings to control the blur amount and direction.

3. Pan and Zoom

Pan and zoom allow you to create a sense of movement by moving and zooming in or out of an overlay. To use pan and zoom:

Select the overlay layer in the timeline.
Tap on the “Animation” icon at the bottom of the screen.
Choose the “Pan & Zoom” option.
Drag the handles on the timeline to control the pan and zoom motion.

4. Rotate

Rotating an overlay can create a dynamic effect. To rotate an overlay:

Select the overlay layer in the timeline.
Tap on the “Animation” icon at the bottom of the screen.
Choose the “Rotate” option.
Drag the handles on the timeline to control the rotation.

5. Slide

Sliding an overlay on or off the screen can create a dramatic entrance or exit. To slide an overlay:

Select the overlay layer in the timeline.
Tap on the “Animation” icon at the bottom of the screen.
Choose the “Slide” option.
Drag the handles on the timeline to control the slide motion.

6. Fade

Fading an overlay in or out can create a smooth transition or draw attention to a specific element. To fade an overlay:

Select the overlay layer in the timeline.
Tap on the “Animation” icon at the bottom of the screen.
Choose the “Fade” option.
Drag the handles on the timeline to control the fade motion.

7. Loop

Looping an overlay can create a continuous effect. To loop an overlay:

Select the overlay layer in the timeline.
Tap on the “Loop” icon at the bottom of the screen.
Choose the number of times you want the overlay to loop.

8. Reverse

Reversing an overlay can create a unique and dynamic effect. To reverse an overlay:

Select the overlay layer in the timeline.
Tap on the “Animation” icon at the bottom of the screen.
Choose the “Reverse” option.

9. Customize Timing

You can customize the timing of your overlay animations by adjusting the duration and easing. Duration controls the length of the animation, while easing determines the smoothness of the motion.

Select the overlay layer in the timeline.
Tap on the “Animation” icon at the bottom of the screen.
Adjust the “Duration” slider to control the length of the animation.
Choose an easing curve from the dropdown menu to determine the smoothness of the motion.

10. Composite Blending

Composite blending allows you to control how the overlay interacts with the underlying video or image. Different blending modes can create various effects, such as overlaying, multiplying, or screening.

Select the overlay layer in the timeline.
Tap on the “Effects” icon at the bottom of the screen.
Choose the “Blending” option.
Select the desired blending mode from the dropdown menu.

Simulate Object Movement

CapCut’s object tracking feature allows you to effortlessly animate and simulate the movement of objects within your videos. Here’s a comprehensive guide on how to harness the power of this tool to enhance your visual storytelling:

1. Select Your Video and Create a New Project

Open CapCut and import the video you want to work with. Create a new project by tapping the “New Project” icon.

2. Add the Object Tracking Overlay

Tap the “Overlays” option and navigate to the “Tracking” category. Select any overlay you desire and drag it into your video timeline.

3. Adjust the Overlay Size and Position

Pinch and drag the overlay’s edges to resize it. Use the positioning handle to move it to the desired location.

4. Mark the Object to Track

Tap the “Tracking” icon (a hand symbol) above the overlay. Position your finger on the object you want to track and release. CapCut will automatically track the movement of that object.

5. Customize the Tracking Parameters

Click the “Advanced Tracking” settings button (next to the Tracking icon). Here, you can adjust the “Tracking Sensitivity” to fine-tune the accuracy of the tracking.

6. Set the Animation Keyframes

Locate the “Keyframes” tab in the bottom toolbar. Tap the “+” icon to create a new keyframe. Drag the keyframe markers along the timeline to specify the object’s movement path.

7. Preview and Refine the Movement

Tap the “Play” button to preview the animation. If necessary, adjust the keyframe positions or modify the overlay’s size or position to optimize the movement.

8. Additional Animation Options

CapCut offers additional animation tools within the “Edit” menu. You can rotate, scale, fade in or fade out the overlay to create more dynamic effects.

9. Export the Animated Video

Once satisfied with the animation, tap the “Export” button and choose the desired video quality and resolution.

Tips for Accurate Tracking:

Ensure the object you want to track is distinct and clearly visible against the background.
Use a longer video clip to provide CapCut with more data for accurate tracking.
Avoid using overlays that are too complex or contain multiple moving elements.
Place the overlay as close to the object as possible for better tracking.
Adjust the Tracking Sensitivity settings to find the optimal balance between accuracy and smoothness.
Experiment with different keyframe intervals to create more fluid or dramatic movement.
Use slow motion or freeze frames to highlight specific moments of the animation.
Consider adding additional animated effects, such as rotations or scales, to enhance the visual interest.
Preview the animation multiple times to ensure it meets your expectations.
Remember that object tracking accuracy can vary depending on the complexity of the video and the object being tracked.

Troubleshooting Tracking Issues

Issue	Solution
Tracking is inaccurate	Adjust Tracking Sensitivity settings, increase video length, or try a different overlay
Object disappears from the overlay	Reposition the overlay or create additional keyframes to ensure continuous tracking
Overlay jitters or moves unexpectedly	Reduce Tracking Sensitivity, adjust keyframes, or use a more stable video clip
Overlay won’t track at all	Check if the object is visible and distinct, try a different overlay design, or update CapCut

21. Troubleshooting Common Issues

Problem: The overlay doesn’t follow the subject’s movement smoothly.

Possible causes and solutions:

The subject’s movement is too fast or erratic. Try slowing down the clip or using a different stabilization technique.
The tracking points are not set correctly. Make sure the tracking points are placed on distinct and recognizable features of the subject.
The overlay is too large or complex. Try reducing the size or simplifying the overlay.
The tracking algorithm is not working properly. Try restarting CapCut or clearing its cache.

Problem: The overlay jumps or flickers during the tracking.

Possible causes and solutions:

The subject’s movement is too jerky. Try using a different stabilization technique or smoothing out the clip.
There is too much motion blur in the clip. Try reducing the motion blur using a post-processing tool.
The overlay’s opacity or blending mode is not set correctly. Try adjusting the overlay’s opacity or blending mode to make it less noticeable.
There is a problem with the hardware or software. Try restarting your device or updating CapCut to the latest version.

Problem: The overlay is not visible or is too small.

Possible causes and solutions:

The overlay is not set to a visible layer. Make sure the overlay is set to a visible layer in the timeline.
The overlay’s opacity is set too low. Adjust the overlay’s opacity to make it more visible.
The overlay is too small. Increase the size of the overlay.
The overlay is hidden behind other objects. Reorder the layers in the timeline to ensure the overlay is visible.

Problem: The overlay’s shape or position is not correct.

Possible causes and solutions:

The tracking points are not set correctly. Make sure the tracking points are placed on the correct features of the subject.
The overlay is not set to the correct scale or rotation. Adjust the overlay’s scale and rotation to match the subject.
The overlay’s anchor point is not set correctly. Adjust the overlay’s anchor point to change its position relative to the tracking points.
There is a problem with the hardware or software. Try restarting your device or updating CapCut to the latest version.

Use Tracking in conjunction with Other CapCut Tools

Tracking is a powerful tool in CapCut that can be used to create dynamic and engaging videos. However, it can also be used in conjunction with other CapCut tools to create even more impressive effects.

Here are a few ideas for using tracking with other CapCut tools:

Use tracking with keyframes to create complex animations. Keyframes are points in a video where you can set specific values for properties such as position, scale, and rotation. By using tracking to follow an object in your video, you can then use keyframes to animate that object in a variety of ways.
Use tracking with masks to create selective effects. Masks are shapes that you can use to hide or reveal parts of your video. By using tracking to follow an object in your video, you can then use a mask to selectively apply effects to that object.
Use tracking with transitions to create smooth and seamless transitions between clips. Transitions are effects that you can use to connect two clips in your video. By using tracking to follow an object in your video, you can then use a transition to smoothly transition from one clip to another.

Here is a more detailed example of how you can use tracking in conjunction with other CapCut tools to create a complex animation:

1. Import your video into CapCut.
2. Select the clip that you want to animate.
3. Tap on the “Tracking” tool in the toolbar.
4. Draw a box around the object that you want to track.
5. Tap on the “Start Tracking” button.
6. CapCut will now track the selected object throughout the clip.
7. Tap on the “Keyframes” tool in the toolbar.
8. Tap on the “Add Keyframe” button to add a keyframe at the current position in the video.
9. Move the playhead to a different position in the video.
10. Tap on the “Add Keyframe” button again to add another keyframe.
11. Repeat steps 9 and 10 to add as many keyframes as you need.
12. Use the sliders in the keyframe panel to adjust the position, scale, and rotation of the object at each keyframe.
13. Tap on the “Play” button to preview your animation.
14. When you are satisfied with your animation, tap on the “Export” button to save it.

Adding Multiple Tracking Points

In addition to adding a single tracking point, you can also add multiple tracking points to an object. This can be useful for tracking objects that are moving in different directions or for creating more complex animations.

To add multiple tracking points, simply follow these steps:

1. Import your video into CapCut.
2. Select the clip that you want to animate.
3. Tap on the “Tracking” tool in the toolbar.
4. Draw a box around the object that you want to track.
5. Tap on the “Add Tracking Point” button in the toolbar.
6. Repeat steps 4 and 5 to add as many tracking points as you need.
7. Tap on the “Start Tracking” button.
8. CapCut will now track the selected object throughout the clip.
9. You can now use keyframes to animate the object at each tracking point.

Using Tracking with Effects

Once you have tracked an object, you can use a variety of effects to enhance your animation. Some of the most popular effects that can be used with tracking include:

Motion Blur: This effect can be used to create a sense of speed or movement.
Zoom: This effect can be used to zoom in or out on the tracked object.
Rotation: This effect can be used to rotate the tracked object.
Opacity: This effect can be used to fade the tracked object in or out.

To use an effect with tracking, simply select the effect from the effects panel and then tap on the “Apply” button. You can then use the sliders in the effect panel to adjust the settings of the effect.

Troubleshooting Tracking

If you are having trouble with tracking, there are a few things that you can try:

Make sure that the object that you are trying to track is clearly defined and has good contrast with the background.
Try using a different tracking algorithm. CapCut offers a variety of different tracking algorithms that you can choose from.
Increase the number of tracking points. This can help to improve the accuracy of the tracking.
Reduce the speed of the object that you are tracking. This can make it easier for CapCut to track the object.

If you are still having trouble with tracking, you can always contact CapCut support for help.

Effect	Description
Motion Blur	Creates a sense of speed or movement.
Zoom	Zooms in or out on the tracked object.
Rotation	Rotates the tracked object.
Opacity	Fades the tracked object in or out.

Unlock the Potential of CapCut’s Tracking Capabilities

1. Delve into the Tracking Module’s Interface

Upon launching CapCut, tap the “Edit” button to commence editing a video. Navigate to the “Animation” tab, where you will find the “Tracking” option. Clicking on it reveals the tracking module’s interface, comprising two primary sections: the video preview area and the tracking adjustment panel. The video preview area showcases the video being edited, while the tracking adjustment panel provides controls for adjusting the tracking parameters.

2. Precisely Position the Starting Point

To initiate tracking, meticulously select the starting point from which the tracking should commence. Using the video preview area, identify the frame that aligns with the desired starting point. Subsequently, tap “Set Start Point” to lock in this frame as the starting point for tracking.

3. Select the Object to Track

With the starting point established, it’s time to define the object that will be tracked throughout the video. In the video preview area, meticulously highlight the object by tapping and dragging over it. CapCut will automatically generate a bounding box around the selected object. Fine-tune the bounding box by adjusting its size and position to precisely encompass the object you want to track.

4. Adjust the Tracking Area

The tracking area determines the region around the tracked object within which CapCut will perform tracking. By default, CapCut sets a suitable tracking area. However, you can manually adjust the tracking area to refine the tracking process. Utilize the handles on the bounding box to enlarge or shrink the tracking area, ensuring it encompasses the object’s anticipated movements.

5. Choose a Tracking Mode

CapCut offers two tracking modes: “Standard” and “Advanced.” The “Standard” mode is recommended for videos with simple object movements, while the “Advanced” mode provides more granular control for complex object movements. Select the appropriate mode based on the complexity of object movements in your video.

6. Configure Tracking Settings

The tracking settings section allows you to further refine the tracking process. Here’s a breakdown of each setting:

Blur Sensitivity: Adjusts the sensitivity of blur detection, which can impact tracking accuracy. Higher sensitivity detects blur more readily, while lower sensitivity reduces false positives.
Motion Sensitivity: Adjusts the sensitivity to motion, which also affects tracking accuracy. Higher sensitivity detects motion more quickly, while lower sensitivity reduces false positives.
Track Backward: Enables tracking in reverse, from the end point to the start point.

7. Preview the Tracking Path

Before applying the tracking, it’s prudent to preview the tracking path to ensure its accuracy. Tap the “Preview Path” button in the tracking adjustment panel to visualize the path the tracked object will follow. If the path appears to deviate from the desired trajectory, adjust the tracking parameters accordingly.

8. Apply the Tracking

Once satisfied with the tracking path, tap the “Apply” button to incorporate the tracking into your video. CapCut will automatically animate the selected object, making it seamlessly follow the designated path.

9. Fine-tune the Animation

After applying the tracking, you may want to fine-tune the animation to achieve the desired effect. CapCut provides several options for animation customization:

Animation Duration: Adjust the duration of the animation to control the speed at which the object moves along the path.
Animation Curve: Select a pre-designed animation curve to create various animation effects, such as linear, ease in, ease out, and bounce.
Keyframes: Add keyframes to the animation path to precisely control the object’s position, rotation, and scale at specific points in time.
Rotation and Scaling: Adjust the rotation and scaling of the tracked object to create dynamic effects.

10. Add an Overlay

To further enhance the tracking effect, consider adding an overlay to the tracked object. Overlays can be text, images, or videos that are superimposed onto the tracked object, adding additional visual interest and information.

11. Advanced Tracking Techniques

For more complex tracking scenarios, CapCut offers advanced tracking techniques that provide greater flexibility and control:

Multi-Object Tracking: Track multiple objects simultaneously, each following its own unique path.
Object Replacement: Replace the tracked object with a different image or video, creating intriguing effects.
Motion Path Editor: Manually create and edit the motion path for the tracked object, providing precise control over its movement.

12. Creative Applications of Tracking

The creative applications of tracking are boundless, enabling you to produce captivating and engaging videos:

Animated Text: Track text to create dynamic, moving text effects that grab attention.
Product Showcase: Highlight products by tracking them in videos, showcasing their features and benefits.
Tutorials and Demonstrations: Visually explain concepts by tracking objects or areas of interest.
Video Effects: Create stunning video effects by combining tracking with other video editing tools.

36. Comprehensive Guide to CapCut’s Tracking Settings

Setting	Description
Blur Sensitivity	Adjusts the sensitivity of blur detection, which can impact tracking accuracy. Higher sensitivity detects blur more readily, while lower sensitivity reduces false positives.
Motion Sensitivity	Adjusts the sensitivity to motion, which also affects tracking accuracy. Higher sensitivity detects motion more quickly, while lower sensitivity reduces false positives.
Track Backward	Enables tracking in reverse, from the end point to the start point.
Track Rotation	When enabled, CapCut will track the rotation of the selected object, ensuring it remains properly oriented throughout the animation.
Track Scale	When enabled, CapCut will track the scale of the selected object, allowing it to be resized dynamically during animation.
Motion Interpolation	Controls the smoothness of the animation path. Higher values result in smoother animations, while lower values create more abrupt transitions.
Keyframe Interpolation	Controls the interpolation method used between keyframes. Options include linear, smooth, hold, and bounce.

Enhance Your CapCut Workflow

Adding Tracking to CapCut Overlay

Navigating the CapCut Interface

Familiarize yourself with CapCut’s user interface. Locate the “Overlay” button in the bottom toolbar. Tap on it to add an overlay to your video.

Selecting an Overlay

CapCut provides a wide selection of overlays, including images, videos, and animated elements. Browse through the available options and choose the one that best suits your needs.

Positioning and Scaling the Overlay

Once you’ve selected an overlay, use your fingers to adjust its position and scale. Pinch and zoom to resize the overlay, and drag it to move it around the video.

Adjusting the Overlay’s Appearance

CapCut allows you to customize the appearance of your overlay by adjusting its opacity, color, and blending mode. Experiment with these settings to achieve the desired visual effect.

Adding Animation to the Overlay

CapCut offers a variety of animation options for overlays. You can make the overlay fade in, out, or move in a specific direction. Explore the animation options and choose the one that best suits your project.

Creating a Multi-Layer Overlay

If you want to add multiple overlays to your video, simply repeat the steps above. Each overlay can have its own unique settings and animations, allowing you to create complex and dynamic effects.

Using Keyframes for Advanced Tracking

Keyframes enable you to precisely control the movement and appearance of your overlay over time. Add keyframes by tapping on the “Add Keyframe” button in the timeline. You can then adjust the overlay’s position, scale, and settings at each keyframe.

Creating Smooth Tracking

For smooth and seamless tracking, ensure that there are enough keyframes to represent the entire duration of the movement. The more keyframes you add, the more accurate the tracking will be.

Fine-Tuning the Tracking

Once you’ve created the keyframes, you can fine-tune the tracking by dragging the handles on the timeline. Adjust the timing and position of the handles to achieve the desired movement.

Applying Tracking to Multiple Overlays

You can apply tracking to multiple overlays simultaneously. Simply select the overlays you want to track and link them together by selecting the “Link” button in the timeline.

Using 3D Tracking for Realistic Effects

CapCut’s 3D tracking feature allows you to create realistic motion effects. Enable 3D tracking in the overlay settings and adjust the “Rotation X,” “Rotation Y,” and “Rotation Z” values to simulate the movement of the overlay in three dimensions.

Advanced Tracking Techniques

Mastering keyframes and 3D tracking opens up a world of possibilities for creating dynamic and immersive overlay effects. Experiment with different techniques and settings to achieve the perfect tracking for your videos.

Add a Touch of Magic to Your Videos

1. Select Your Desired Overlay

Open the CapCut app and import your video. Tap on the “Overlays” option and browse through the available overlays. Select an overlay that complements your video’s theme and style.

2. Adjust the Overlay’s Settings

Once you’ve selected an overlay, you can customize its appearance. Tap on the “Edit” icon to adjust its size, position, rotation, and opacity.

3. Enable Object Tracking

To make the overlay follow a specific object or area in your video, enable the “Object Tracking” feature. Tap on the “Tracking” tab and select the “Automatic” or “Manual” tracking mode.

4. Set Up the Tracking Target

In the “Object Tracking” tab, you can manually draw a box around the object or area you want the overlay to track. Alternatively, you can tap on the “Detect Object” icon to automatically detect objects in your video.

To manually draw the tracking box:

Drag the handles of the box to adjust its size and position.
Use the rotation tool to rotate the box.
Tap on the “Invert” icon to invert the tracking area.
Tap on the “Add” icon to confirm the tracking box.

To automatically detect objects:

Tap on the “Detect Object” icon.
Select the object you want to track from the detected objects.
Tap on the “Confirm” button.

5. Fine-Tune the Tracking Settings

In the “Tracking” tab, you can further refine the tracking settings. Adjust the “Tracking Sensitivity” and “Tracking Smoothing” sliders to optimize the overlay’s tracking performance.

6. Additional Tracking Options

CapCut offers additional tracking options to enhance the tracking accuracy.

Detect Multiple Objects: Tap on the “Multiple Objects” icon to track multiple objects or areas simultaneously.

Frames Per Second: By default, CapCut sets the tracking frame rate to 30 FPS. You can adjust this setting to improve tracking accuracy or reduce processing time.

Tracking Area Margin: Adjust this margin to expand or contract the tracking area around the target object.

7. Customize the Overlay’s Appearance

After setting up the tracking, you can further customize the overlay’s appearance. Adjust its color, add effects, or apply filters to match your video’s aesthetics.

8. Preview and Save Your Overlay

Tap on the “Preview” button to see the final result of your overlay. Make any necessary adjustments and then tap on the “Save” button to save the overlay to your device.

9. Import the Overlay into Your Video

Open your CapCut project and tap on the “Overlays” tab. Tap on the “Add Overlay” button and select the saved overlay from your device.

10. Position and Adjust the Overlay

Drag and drop the overlay onto your video. Adjust its position, size, and rotation to match your desired placement. You can also fine-tune the overlay’s settings in the “Edit” menu.

11. Export and Share Your Video

Once you’re satisfied with your overlay, tap on the “Export” button. Select the desired video resolution and quality settings. Tap on the “Export” button again to save the video to your device.

12. Tips for Optimal Tracking Results

Ensure good lighting conditions for accurate object detection.
Avoid objects with similar colors or patterns to prevent tracking errors.
Adjust the tracking settings (sensitivity and smoothness) based on the object’s movement and video footage.
Consider using manual tracking for more precise and controlled tracking.
For complex tracking scenarios, consider using dedicated object tracking software or apps.

Push the Boundaries of Storytelling

CapCut, a powerful video editing app, empowers you to enhance your storytelling through captivating overlays. By adding tracking to these overlays, you can elevate your narrative, creating dynamic and visually engaging content.

47. Advanced Tracking Techniques for CapCut Overlays

To unlock the full potential of tracking in CapCut overlays, embrace these advanced techniques:

1. Positional Tracking for Precise Placement

Precisely position your overlay elements by employing positional tracking. This allows you to define the exact coordinates of the overlay’s movement, ensuring seamless transitions and accurate placement.

2. Motion Path Tracking for Dynamic Animation

Unleash dynamic animations by utilizing motion path tracking. Create custom paths for your overlay elements, giving them a fluid and realistic motion that captivates viewers.

3. Scale Tracking for Dynamic Resizing

Adjust the size of your overlay elements dynamically with scale tracking. This technique enables smooth resizing effects, enhancing the visual impact of your overlays and adding depth to your storytelling.

4. Rotation Tracking for Dynamic Positioning

Add an extra dimension to your overlays with rotation tracking. Create dynamic rotations that bring a sense of depth and movement to your visuals, enhancing the overall impact of your narrativa

5. Masking Techniques for Creative Effects

Utilize masking techniques to add creative flair to your overlays. Define specific areas of the overlay to show or hide, creating unique effects that draw attention and evoke emotion.

6. Blending Modes for Seamless Transitions

Experiment with blending modes to seamlessly integrate your overlays into your footage. Adjust the opacity and blend mode settings to create natural transitions and enhance the overall cohesiveness of your visual storytelling.

7. Custom Keyframing for Precise Control

Take complete control over your overlay tracking using custom keyframing. Set specific points along the overlay’s movement path, allowing you to fine-tune the timing and animation for unparalleled precision.

8. 3D Tracking for Immersive Experiences

Explore the possibilities of 3D tracking for an immersive viewing experience. Track objects or surfaces in your footage and anchor your overlay elements to them, creating a realistic and engaging visual narrative.

9. AI-Powered Tracking for Effortless Results

Harness the power of AI-powered tracking to streamline your workflow. Utilize advanced algorithms that automatically detect and track objects or elements in your footage, saving you time and effort.

10. Combining Techniques for Complex Effects

Combine multiple tracking techniques to create visually stunning and engaging effects. Experiment with different combinations of positioning, motion paths, scale, rotation, and masking to unleash your creativity and tell impactful stories through your overlays.

How To Add Tracking To Capcut Overlay

Adding tracking to an overlay in CapCut allows you to move the overlay across the screen. This can be useful for creating dynamic effects, such as moving text or graphics across the screen. To add tracking to an overlay in CapCut, follow these steps:

Select the overlay you want to add tracking to.
Tap on the “Animation” tab.
Tap on the “Add Keyframe” button.
Drag the keyframe to the point in the timeline where you want the overlay to start moving.
Tap on the “Position” tab.
Enter the starting position of the overlay.
Tap on the “Add Keyframe” button.
Drag the keyframe to the point in the timeline where you want the overlay to end moving.
Enter the ending position of the overlay.
Tap on the “Play” button to preview the animation.