How to Effortlessly Clean Your Bella Air Fryer for Optimal Performance

Maintaining a clean Bella air fryer is not only essential for optimal performance but also for preserving the health and safety of your family. Regular cleaning can prevent the buildup of food residue, grease, and other contaminants that can harbor bacteria and compromise the quality of your fried foods. By following a few simple steps and using the right cleaning agents, you can keep your Bella air fryer spotless and ensure that your meals are cooked to perfection.

The cleaning process for a Bella air fryer is relatively straightforward and requires minimal effort. Before you begin, ensure that the air fryer is unplugged and has cooled down completely. Then, remove the removable parts, including the air fryer basket, tray, and drip tray. Soak these parts in a warm, soapy water solution for about 10-15 minutes to loosen any stuck-on food particles. Using a soft sponge or brush, gently scrub away any remaining residue. Rinse the parts thoroughly with clean water and dry them completely before reassembling the air fryer.

For cleaning the interior of the air fryer, use a damp cloth dipped in a mild dish soap solution. Wipe down the interior surfaces, taking care to reach all the corners and crevices. Avoid using harsh chemicals or abrasive cleaners, as these can damage the coating on the interior. Once the interior is clean, wipe it down with a clean, damp cloth to remove any soap residue. Allow the air fryer to dry thoroughly before storing it away or using it again. By following these simple cleaning tips, you can keep your Bella air fryer in pristine condition and enjoy delicious, healthy fried foods for years to come.

Disassembling Your Bella Air Fryer

Before you begin cleaning your Bella air fryer, it’s important to disassemble it properly. Here are the steps you need to follow:

Unplug the air fryer and let it cool down completely. Never attempt to clean your air fryer while it is still hot or plugged in, as this could pose a safety hazard.
Open the air fryer basket and remove the food basket. The food basket is the removable insert that holds your food while it cooks.
Remove the cooking pot from the base of the air fryer. The cooking pot is the non-stick coated pan that sits inside the base of the air fryer.
Detach the heating element from the base of the air fryer. The heating element is the metal coil located at the top of the air fryer. To detach it, simply lift it up and out of the base.
Remove the fan from the base of the air fryer. The fan is located at the bottom of the air fryer and is responsible for circulating the hot air. To remove it, simply unscrew the retaining screws and pull it out.
Wipe down the exterior of the air fryer with a damp cloth. Use a mild detergent if necessary. Do not immerse the air fryer in water or any other liquid.
Reassemble the air fryer in reverse order. Once all of the parts are clean and dry, you can reassemble the air fryer by following the steps above in reverse order.

Table: How to disassemble your Bella air fryer

| Step | Action |
|—|—|
| 1 | Unplug the air fryer and let it cool down completely. |
| 2 | Open the air fryer basket and remove the food basket. |
| 3 | Remove the cooking pot from the base of the air fryer. |
| 4 | Detach the heating element from the base of the air fryer. |
| 5 | Remove the fan from the base of the air fryer. |
| 6 | Wipe down the exterior of the air fryer with a damp cloth. |
| 7 | Reassemble the air fryer in reverse order. |

Removing the Crispy Plate and Basket

The crispy plate and basket are two of the most important parts of your Bella air fryer. They’re what cooks your food, so it’s important to keep them clean. Here’s how to do it:

Remove the crispy plate and basket from the air fryer.
Wash the crispy plate and basket in hot, soapy water. You can use a sponge or a brush to remove any food residue.
Rinse the crispy plate and basket thoroughly with clean water.
Dry the crispy plate and basket with a clean towel.
Reassemble the air fryer and you’re ready to cook!

Tips for cleaning the crispy plate and basket

Here are a few tips to help you clean the crispy plate and basket in your Bella air fryer:

Don’t use abrasive cleaners or scouring pads on the crispy plate or basket. This can damage the coating.
If the crispy plate or basket is really dirty, you can soak it in hot, soapy water for 30 minutes before washing it.
Make sure to dry the crispy plate and basket thoroughly before reassembling the air fryer. This will help prevent rust.
Clean the crispy plate and basket after every use to keep it in good condition.

Troubleshooting

If you’re having trouble cleaning the crispy plate or basket in your Bella air fryer, here are a few troubleshooting tips:

If the crispy plate or basket is stuck, try using a spatula or a butter knife to gently pry it loose.
If the crispy plate or basket is discolored, you can try using a baking soda paste to clean it. Make a paste by mixing baking soda with water, and then apply it to the discolored area. Let it sit for 30 minutes, and then wash the crispy plate or basket as usual.
If the crispy plate or basket is rusty, you can try using a vinegar solution to clean it. Make a solution by mixing equal parts vinegar and water, and then apply it to the rusty area. Let it sit for 30 minutes, and then wash the crispy plate or basket as usual.

If you’re still having trouble cleaning the crispy plate or basket in your Bella air fryer, you can contact Bella customer service for assistance.

Issue	Solution
Crispy plate or basket is stuck	Use a spatula or a butter knife to gently pry it loose.
Crispy plate or basket is discolored	Use a baking soda paste to clean it.
Crispy plate or basket is rusty	Use a vinegar solution to clean it.

Cleaning the Crispy Plate

The crispy plate is one of the most important parts of your Bella air fryer. It’s what gives your food that crispy, golden-brown exterior. But over time, the crispy plate can become dirty and greasy. If you don’t clean it regularly, it can affect the performance of your air fryer and the taste of your food.

Here are the steps on how to clean the crispy plate of your Bella air fryer:

Unplug the air fryer and let it cool completely. This is important for safety reasons.
Remove the crispy plate from the air fryer. To do this, simply grasp the handle of the crispy plate and pull it straight up.
Wash the crispy plate in hot soapy water. Use a soft sponge or cloth to avoid scratching the surface of the plate.
Rinse the crispy plate thoroughly with clean water. Make sure to remove all of the soap residue.
Dry the crispy plate completely with a clean towel. You can also air-dry the plate by placing it on a wire rack.
Reinsert the crispy plate into the air fryer. Make sure that the plate is securely in place before using the air fryer.

Here are some additional tips for cleaning the crispy plate of your Bella air fryer:

If the crispy plate is very dirty, you can soak it in hot soapy water for 30 minutes before washing it.
Do not use abrasive cleaners or steel wool to clean the crispy plate. This can damage the surface of the plate.

Clean the crispy plate regularly to prevent it from becoming dirty and greasy. This will help to extend the life of your air fryer and ensure that your food cooks evenly.

Cleaning the Basket

The basket is the main component of the Bella air fryer that comes into contact with food, so it’s important to clean it regularly. Fortunately, this is a relatively easy process.

Materials You’ll Need

Warm water
Dish soap
Non-abrasive sponge or cloth
Baking soda (optional)
White vinegar (optional)

Step-by-Step Instructions

Unplug the air fryer and allow it to cool completely. This is an important safety precaution to avoid any accidents.
Remove the basket and wash it with warm soapy water. Use a non-abrasive sponge or cloth to gently scrub away any food residue. If there are any stubborn stains, you can soak the basket in warm soapy water for 10-15 minutes before scrubbing.
Rinse the basket thoroughly with clean water. Make sure to remove all traces of soap residue.
Dry the basket completely. Use a clean kitchen towel or allow the basket to air dry. If the basket is not completely dry, it can cause the air fryer to smoke when it is used next.
Clean the heating element (optional). If you notice any food residue or grease on the heating element, you can clean it using a damp cloth. Do not use any harsh chemicals or abrasive cleaners, as these can damage the heating element.
Reassemble the air fryer. Once the basket and heating element are clean and dry, you can reassemble the air fryer. Make sure that all of the components are securely in place before using the air fryer.

Additional Tips

If the basket is particularly greasy, you can soak it in a solution of baking soda and water (1 tablespoon of baking soda per cup of water) for 30 minutes before washing it.
To remove stubborn odors from the basket, you can soak it in a solution of white vinegar and water (1 cup of vinegar per gallon of water) for 30 minutes before washing it.
It is important to clean the basket after each use to prevent the build-up of food residue and grease.

Cleaning the Exterior

The exterior of the Bella air fryer can be cleaned with a damp cloth. Do not use any harsh chemicals or abrasive cleaners, as these can damage the finish of the appliance.

Troubleshooting

If you are having trouble cleaning your Bella air fryer, here are some troubleshooting tips:

The basket is not coming out of the air fryer. Make sure that the basket is completely cool before trying to remove it. If the basket is still stuck, you can try gently wiggling it back and forth until it comes loose.
The heating element is not heating up. Make sure that the air fryer is plugged in and that the power switch is turned on. If the heating element is still not heating up, you may need to contact Bella customer service for assistance.
The air fryer is smoking. This can be caused by several factors, including:
1. The basket is not completely dry.
2. There is food residue or grease on the heating element.
To fix this, unplug the air fryer and allow it to cool completely. Then, clean the basket and heating element according to the instructions above.

Washing the Basket and Crispy Plate

To ensure optimal performance and cleanliness of your Bella air fryer, it’s crucial to maintain its components regularly. One essential aspect is cleaning the basket and crispy plate, which involves the following steps:

1. Allow to Cool:

Before handling the basket and crispy plate, allow them to cool down completely to prevent burns. This will also make the cleaning process safer and more comfortable.

2. Remove Loose Debris:

After cooling, shake off any loose food particles or debris from the basket and crispy plate. This step helps remove excess residue before washing them thoroughly.

3. Use Warm, Soapy Water:

Fill a large bowl or sink with warm, soapy water. The soap should be mild and non-abrasive, such as dish soap. Immerse the basket and crispy plate in the solution and let them soak for a few minutes to loosen any stubborn food remnants.

4. Wash with a Soft Sponge:

Using a soft sponge, gently scrub the basket and crispy plate to remove any remaining food particles or grease. Avoid using abrasive sponges or steel wool, as they can scratch the surface.

5. Rinse Thoroughly:

Rinse the basket and crispy plate thoroughly with clean water to remove any soap residue. It is recommended to rinse them under running water for at least 30 seconds to ensure complete rinsing.

6. Dry Completely:

After rinsing, use a clean towel or paper towels to pat the basket and crispy plate dry. Leaving them damp can lead to moisture buildup and potential rust or mold growth.

7. Storage:

Once completely dry, store the basket and crispy plate in a clean, dry place. Keep them away from moisture and direct sunlight to maintain their quality.

Additional Tips:

For deep cleaning, you can use a mixture of equal parts white vinegar and water. Soak the basket and crispy plate in this solution for 30 minutes before washing and rinsing as described above.

If the basket or crispy plate has stubborn food residue that won’t come off with regular washing, you can try using baking soda. Make a paste by combining baking soda with a small amount of water and apply it to the affected areas. Let it sit for 15-20 minutes, then scrub with a soft brush or sponge and rinse thoroughly.

Cleaning Step	Description
Allow to Cool	Let the basket and crispy plate cool down before handling to prevent burns.
Remove Loose Debris	Shake off any loose food particles or debris from the basket and crispy plate.
Soak in Warm, Soapy Water	Immerse the basket and crispy plate in warm, soapy water and let them soak for a few minutes.
Wash with a Soft Sponge	Gently scrub the basket and crispy plate with a soft sponge to remove food particles and grease.
Rinse Thoroughly	Rinse the basket and crispy plate under running water for at least 30 seconds to remove all soap residue.
Dry Completely	Pat the basket and crispy plate dry with a clean towel or paper towels.
Store in a Clean, Dry Place	Keep the basket and crispy plate in a clean, dry place away from moisture and direct sunlight.

Wiping Down the Exterior

Maintaining the exterior of your Bella air fryer is crucial for its appearance and longevity. Follow these comprehensive steps to ensure a spotless exterior:

1. Unplug the Air Fryer:

Always unplug the air fryer before starting any cleaning process. It’s an essential safety measure to prevent any electrical hazards.

2. Allow the Air Fryer to Cool:

Let the air fryer cool down completely before cleaning. This helps prevent burns and ensures that any remaining oil or grease has solidified.

3. Gather Your Materials:

You’ll need a few basic materials for this task: a soft, damp cloth or sponge, mild dish soap, and a glass cleaner for the control panel (optional).

4. Wipe Down the Exterior:

Gently wipe down the exterior surfaces of the air fryer using the damp cloth or sponge. Use mild dish soap if necessary to remove any grease or food stains.

5. Clean the Control Panel (Optional):

If the control panel is dirty, use a glass cleaner and a clean cloth to gently wipe it down. Avoid using abrasive cleaners or sponges that could scratch the panel.

6. Wipe Dry:

After cleaning, use a dry cloth to wipe down the exterior of the air fryer, removing any remaining moisture. This helps prevent water damage or rust.

7. Check for Damage:

While cleaning the exterior, inspect it for any cracks, dents, or other damage. If you find any issues, consult the manufacturer’s instructions or contact customer service for further assistance.

8. Deep Cleaning Exterior Stains:

For stubborn stains, follow these additional steps:

a. Create a Cleaning Solution: Mix equal parts white vinegar and water in a bowl to create a cleaning solution.

b. Apply the Solution: Dip a clean cloth into the solution and gently apply it to the stained areas of the exterior.

c. Allow to Sit: Let the solution sit for a few minutes to allow it to break down the stains.

d. Wipe Away: Use a damp cloth to wipe away the loosened stains and any remaining solution.

e. Repeat if Necessary: If the stains persist, repeat steps 8a-8d until they are removed.

9. Clean the Air Intake and Exhaust Vents:

Wipe down the air intake and exhaust vents with a damp cloth to remove any dust or debris. This ensures optimal airflow during use.

10. Touch Up with Olive Oil (Optional):

To maintain the exterior’s shine and protect it from fingerprints, you can apply a thin layer of olive oil using a clean cloth. Buff it in gently for a lustrous finish.

Reassembling Your Bella Air Fryer

Once you have thoroughly cleaned all the components of your Bella air fryer, it’s time to reassemble it. Follow these steps carefully to ensure that your air fryer is properly reassembled and ready to use:

Step 1: Insert the Heating Element into the Housing

Locate the heating element and align it with the corresponding slot in the housing. Carefully slide the heating element into place until it is fully seated.

Step 2: Place the Drip Tray and Basket into the Housing

Position the drip tray inside the housing, ensuring that it is securely in place. Then, place the air fryer basket inside the drip tray, aligning the notches on the basket with the corresponding slots in the tray.

Step 3: Attach the Cooking Chamber to the Housing

Lift the cooking chamber and align it with the housing. Carefully lower the cooking chamber onto the housing, ensuring that it is securely attached.

Step 4: Tighten the Screws

Locate the screws that secure the cooking chamber to the housing. Use a screwdriver to tighten the screws securely, but do not overtighten.

Additional Tips for Proper Reassembly:

1. Ensure that all components are completely dry before reassembling.

2. Handle the heating element carefully to avoid burns.

3. Line up the notches on the components properly to facilitate smooth assembly.

4. Check that the drip tray and basket are securely in place to prevent spills and ensure proper airflow.

5. Tighten the screws securely, but do not overtighten, as this could damage the components.

Step 5: Final Inspection

Once the air fryer is reassembled, inspect it visually to ensure that all components are properly fitted and secure. Check that the heating element is securely in place and that the drip tray and basket are firmly positioned.

Periodic Cleaning Schedule for Bella Air Fryers	Cleaning Frequency
Cleaning the Cooking Chamber and Basket (Including washing with warm soapy water, rinsing, and drying)	After every use
Cleaning the Drip Tray (Including washing with warm soapy water, rinsing, and drying)	After every use
Cleaning the Exterior of the Air Fryer (Including wiping with a damp cloth)	Weekly or as needed
Deep Cleaning (Including disassembling and cleaning all components)	Monthly or as needed

By following these steps and adhering to the recommended cleaning schedule, you can keep your Bella air fryer in optimal condition, ensuring its longevity and performance.

Cleaning the Frying Pan

The frying pan is one of the most important parts of the Bella air fryer, as it is where the food is cooked. It is important to keep the frying pan clean to prevent food from sticking and to ensure that the air fryer cooks evenly. To clean the frying pan, follow these steps:

Remove the frying pan from the air fryer.
Allow the frying pan to cool completely.
Wash the frying pan with warm, soapy water.
Use a soft sponge or cloth to avoid scratching the pan.
Rinse the frying pan thoroughly with clean water.
Dry the frying pan completely with a clean towel.
Reinstall the frying pan in the air fryer.

10. Additional Tips for Cleaning the Frying Pan

Here are some additional tips for cleaning the frying pan:

If food is stuck to the frying pan, you can use a non-abrasive cleaner to remove it.
Do not use steel wool or other abrasive materials to clean the frying pan, as this can damage the finish.
You can also clean the frying pan in the dishwasher, but it is important to place it on the top rack and to use a gentle cycle.
It is important to clean the frying pan after each use to prevent food from sticking and to ensure that the air fryer cooks evenly.

Cleaning the Other Parts of the Bella Air Fryer

In addition to cleaning the frying pan, it is also important to clean the other parts of the Bella air fryer, such as the heating element, the fan, and the exterior. To clean these parts, follow these steps:

Unplug the air fryer from the power outlet.
Remove the frying pan from the air fryer.
Wipe down the heating element and the fan with a damp cloth.
Use a soft brush to remove any food particles that are stuck to the heating element or the fan.
Wipe down the exterior of the air fryer with a damp cloth.
Dry all of the parts of the air fryer completely with a clean towel.
Reinstall the frying pan in the air fryer.
Plug the air fryer back into the power outlet.

Cleaning Schedule

It is important to clean the Bella air fryer regularly to keep it in good working condition. The following is a suggested cleaning schedule:

Frequency	Cleaning Task
After each use	Clean the frying pan
Once a week	Clean the heating element, the fan, and the exterior
Once a month	Deep clean the air fryer

Deep Cleaning

Once a month, you should deep clean the Bella air fryer. To deep clean the air fryer, follow these steps:

Unplug the air fryer from the power outlet.
Remove the frying pan from the air fryer.
Fill the frying pan with a mixture of warm water and vinegar.
Let the frying pan soak for 30 minutes.
Empty the frying pan and rinse it thoroughly with clean water.
Wipe down the heating element and the fan with a damp cloth.
Use a soft brush to remove any food particles that are stuck to the heating element or the fan.
Wipe down the exterior of the air fryer with a damp cloth.
Dry all of the parts of the air fryer completely with a clean towel.
Reinstall the frying pan in the air fryer.
Plug the air fryer back into the power outlet.

Washing the Frying Pan

The frying pan is the most important part of your Bella air fryer. It’s where the food cooks, so it’s essential to keep it clean. Here are the steps on how to wash the frying pan:

Unplug the air fryer and let it cool completely.
Remove the frying pan from the air fryer.
Wash the frying pan with hot, soapy water. Use a soft sponge or cloth to avoid scratching the pan.
Rinse the frying pan thoroughly with clean water.
Dry the frying pan completely with a clean towel.
Reassemble the air fryer and plug it back in.

Here are some additional tips for washing the frying pan:

Do not use abrasive cleaners or sponges on the frying pan.
If the frying pan is very dirty, you can soak it in hot, soapy water for 30 minutes before washing it.
The frying pan is dishwasher safe, but it is recommended to hand-wash it to extend its lifespan.

11. Storing the Bella Air Fryer

Once you have cleaned your Bella air fryer, it is important to store it properly to keep it in good condition. Here are the steps on how to store the Bella air fryer:

Unplug the air fryer and let it cool completely.
Clean the air fryer according to the instructions in this article.
Store the air fryer in a cool, dry place.
Do not store the air fryer in direct sunlight or near a heat source.

Here are some additional tips for storing the Bella air fryer:

If you are storing the air fryer for an extended period of time, it is a good idea to wrap it in a plastic bag or cover it with a cloth to protect it from dust.
Do not store the air fryer in a damp place, as this can cause the metal parts to rust.
If you are storing the air fryer in a cold place, it is important to let it warm up to room temperature before using it.

Troubleshooting Bella Air Fryer

If you are having problems with your Bella air fryer, here are some troubleshooting tips:

Problem	Solution
The air fryer is not heating up.	Make sure that the air fryer is plugged in and that the power switch is turned on. Check the fuse or circuit breaker to make sure that it has not blown or tripped.
The food is not cooking evenly.	Make sure that the food is evenly distributed in the frying pan. You may need to shake the frying pan during cooking to ensure that the food cooks evenly.
The food is sticking to the frying pan.	Make sure that the frying pan is properly greased before cooking. You can also try using a non-stick cooking spray to prevent the food from sticking.
The air fryer is smoking.	Make sure that there is no food or grease on the heating element. You may need to clean the heating element according to the instructions in this article.
The air fryer is making a strange noise.	Make sure that the air fryer is properly assembled. You may need to tighten the screws or bolts that hold the air fryer together.

If you are still having problems with your Bella air fryer, you can contact Bella customer service for assistance.

Drying the Frying Pan

To ensure your Bella air fryer frying pan is completely dry before reassembly, follow these detailed steps:

1. Remove the Frying Pan

Gently lift the frying pan out of the air fryer basket and set it aside.

2. Wipe Down the Frying Pan

Using a clean, microfiber cloth, thoroughly wipe down the frying pan to remove any remaining moisture or oil residue.

3. Use a Paper Towel

Gently pat the frying pan with a paper towel to absorb any excess moisture.

4. Air Dry

Place the frying pan on a clean surface and allow it to air dry for a few minutes.

5. Inspect the Frying Pan

Examine the frying pan for any remaining moisture. If there are any wet spots, repeat steps 2-4 until the frying pan is completely dry.

6. Wipe Dry the Heating Element

Using a dry cloth, wipe down the heating element located in the air fryer basket to remove any residual moisture.

7. Reassemble the Air Fryer

Once the frying pan is completely dry, reassemble the air fryer by inserting the frying pan back into the air fryer basket.

8. Check for Moisture

Before using the air fryer, ensure that all components are completely dry by checking for any lingering moisture.

Troubleshooting:

9. Persistent Moisture

If you encounter persistent moisture, allow the frying pan to air dry for a longer period or use a fan to accelerate the drying process.

10. Contact Customer Service

If you are unable to resolve the moisture issue after following these steps, contact Bella customer service for assistance.

Cleaning the Baking Tray

The baking tray is the most important part of your Bella air fryer, so it’s important to keep it clean. Fortunately, it’s also the easiest part to clean. Simply remove the baking tray from the air fryer and wash it with warm, soapy water. You can also use a dishwasher-safe baking tray, which will make cleaning even easier.

Here are some tips for cleaning the baking tray:

Use a soft sponge or cloth to avoid scratching the baking tray.
Avoid using harsh chemicals or abrasive cleaners.
Rinse the baking tray thoroughly with water after washing.
Dry the baking tray completely before using it again.

What to do if the baking tray is heavily soiled

If the baking tray is heavily soiled, you may need to soak it in warm, soapy water for a few minutes before washing it. You can also use a degreasing agent to help remove grease and grime.

How to remove food residue from the baking tray

If there is food residue stuck to the baking tray, you can use a wooden or plastic spatula to gently scrape it off. You can also use a nylon scrubbing pad to remove stubborn food residue.

How to prevent the baking tray from becoming scratched

To prevent the baking tray from becoming scratched, use a soft sponge or cloth to wash it. Avoid using harsh chemicals or abrasive cleaners.

How to clean the baking tray in the dishwasher

If your baking tray is dishwasher-safe, you can wash it in the dishwasher. Place the baking tray on the top rack of the dishwasher and wash it using the normal cycle.

Cleaning the Heating Element

The heating element is located at the top of the air fryer. It is important to keep the heating element clean to prevent food from burning and to ensure that the air fryer cooks evenly.

To clean the heating element, simply wipe it down with a damp cloth. You can also use a soft brush to remove any food residue that may be stuck to the heating element.

What to do if the heating element is heavily soiled

If the heating element is heavily soiled, you may need to soak it in warm, soapy water for a few minutes before wiping it down. You can also use a degreasing agent to help remove grease and grime.

How to remove food residue from the heating element

If there is food residue stuck to the heating element, you can use a wooden or plastic spatula to gently scrape it off. You can also use a nylon scrubbing pad to remove stubborn food residue.

How to prevent the heating element from becoming scratched

To prevent the heating element from becoming scratched, use a soft cloth to wipe it down. Avoid using harsh chemicals or abrasive cleaners.

Cleaning the Exterior of the Air Fryer

The exterior of the air fryer can be cleaned with a damp cloth. You can also use a mild detergent to remove any grease or grime.

Here are some tips for cleaning the exterior of the air fryer:

Use a soft cloth to avoid scratching the exterior of the air fryer.
Avoid using harsh chemicals or abrasive cleaners.
Rinse the exterior of the air fryer thoroughly with water after cleaning.
Dry the exterior of the air fryer completely before using it again.

What to do if the exterior of the air fryer is heavily soiled

If the exterior of the air fryer is heavily soiled, you may need to soak it in warm, soapy water for a few minutes before wiping it down. You can also use a degreasing agent to help remove grease and grime.

How to remove food residue from the exterior of the air fryer

If there is food residue stuck to the exterior of the air fryer, you can use a wooden or plastic spatula to gently scrape it off. You can also use a nylon scrubbing pad to remove stubborn food residue.

How to prevent the exterior of the air fryer from becoming scratched

To prevent the exterior of the air fryer from becoming scratched, use a soft cloth to wipe it down. Avoid using harsh chemicals or abrasive cleaners.

Washing the Baking Tray

The baking tray is one of the most important parts of your Bella air fryer, so it’s important to keep it clean. Here’s how:

Remove the baking tray from the air fryer.
Wash the baking tray with hot soapy water.
Rinse the baking tray thoroughly.
Dry the baking tray with a clean towel.

If the baking tray is very dirty, you may need to soak it in hot soapy water for a few minutes before washing it.

You can also wash the baking tray in the dishwasher. However, it’s important to note that the dishwasher may damage the nonstick coating on the baking tray. If you choose to wash the baking tray in the dishwasher, be sure to place it on the top rack.

Here are some additional tips for cleaning the baking tray:

Do not use abrasive cleaners or scouring pads to clean the baking tray.
Do not put the baking tray in the oven.
If the baking tray is damaged, do not use it.

By following these tips, you can keep your Bella air fryer baking tray clean and in good condition.

Drying the Baking Tray

Once you’ve cleaned the baking tray and basket, it’s important to dry them thoroughly before storing them. This will help prevent water spots from forming and ensure that your air fryer is ready to use the next time you need it.

To dry the baking tray, simply place it on a wire rack or clean towel and let it air dry. You can also use a paper towel to pat the tray dry.

Once the baking tray is completely dry, you can store it in a cool, dry place. Here are some additional tips for drying the baking tray:

Use a clean towel or paper towel. A dirty towel or paper towel can transfer bacteria to the baking tray.
Air dry the tray completely. Do not put the tray away if it is still wet, as this can cause water spots to form.
Store the tray in a cool, dry place. This will help prevent the tray from rusting or corroding.

Additional Tips for Cleaning Your Bella Air Fryer

In addition to the steps outlined above, here are a few additional tips for cleaning your Bella air fryer:

Clean the air fryer after every use. This will help prevent grease and food particles from building up and clogging the air fryer.
Use a mild dish soap and water to clean the air fryer. Harsh chemicals can damage the air fryer.
Do not use abrasive cleaners or sponges to clean the air fryer. These can scratch the surface of the air fryer.
Dry the air fryer thoroughly before storing it. This will help prevent water spots from forming.
Store the air fryer in a cool, dry place. This will help prevent the air fryer from rusting or corroding.

Part of Air Fryer	Suggested Cleaning Method
Baking tray	Remove the baking tray from the air fryer and wash it in warm, soapy water. You can also use a dishwasher-safe baking tray.
Basket	Remove the basket from the air fryer and wash it in warm, soapy water. You can also use a dishwasher-safe basket.
Heating element	Use a damp cloth to wipe down the heating element. Do not use water or cleaning solutions directly on the heating element.
Exterior of the air fryer	Use a damp cloth to wipe down the exterior of the air fryer. You can also use a mild cleaning solution if needed.
Controls	Use a damp cloth to wipe down the controls. Do not use water or cleaning solutions directly on the controls.

Cleaning the Pizza Plate

The pizza plate is one of the most important parts of your Bella air fryer, as it is what you use to cook your pizzas. It is important to keep the pizza plate clean to prevent food from sticking and to ensure that your pizzas cook evenly. Here are the steps on how to clean the pizza plate:

Turn off the air fryer and allow it to cool completely before cleaning the pizza plate.
Remove the pizza plate from the air fryer.
Wash the pizza plate in hot, soapy water. Be sure to scrub all of the food residue off of the plate.
Rinse the pizza plate thoroughly with clean water.
Dry the pizza plate with a clean towel.
Apply a small amount of oil to the pizza plate and spread it around evenly. This will help to prevent food from sticking to the plate the next time you use it.
Reinsert the pizza plate into the air fryer.

Cleaning the Pizza Plate in the Dishwasher

If you have a dishwasher, you can also clean the pizza plate in the dishwasher. Here are the steps on how to do this:

Place the pizza plate in the dishwasher.
Select the high-heat cycle.
Add detergent to the dishwasher.
Start the dishwasher.
Once the dishwasher cycle is complete, remove the pizza plate from the dishwasher and allow it to dry completely.

Tips for Cleaning the Pizza Plate

Here are a few tips for cleaning the pizza plate:

Do not use abrasive cleaners on the pizza plate, as this can damage the coating.
Do not soak the pizza plate in water for extended periods of time, as this can also damage the coating.
Clean the pizza plate regularly to prevent food from sticking and to ensure that your pizzas cook evenly.

Troubleshooting

If you are having trouble cleaning the pizza plate, here are a few troubleshooting tips:

If food is stuck to the pizza plate, try soaking the plate in hot, soapy water for a few minutes before scrubbing it clean.
If the pizza plate is discolored, try using a vinegar and water solution to clean it. Mix equal parts vinegar and water in a bowl and soak the pizza plate in the solution for a few minutes before scrubbing it clean.
If the pizza plate is warped, do not use it. A warped pizza plate can cause your pizzas to cook unevenly.

Cleaning the Pizza Plate: Frequently Asked Questions

Here are some frequently asked questions about cleaning the pizza plate:

How often should I clean the pizza plate?

You should clean the pizza plate regularly to prevent food from sticking and to ensure that your pizzas cook evenly. It is a good idea to clean the pizza plate after each use.

Can I use abrasive cleaners to clean the pizza plate?

No, you should not use abrasive cleaners to clean the pizza plate, as this can damage the coating.

Can I soak the pizza plate in water for extended periods of time?

No, you should not soak the pizza plate in water for extended periods of time, as this can also damage the coating.

What should I do if food is stuck to the pizza plate?

If food is stuck to the pizza plate, try soaking the plate in hot, soapy water for a few minutes before scrubbing it clean.

What should I do if the pizza plate is discolored?

If the pizza plate is discolored, try using a vinegar and water solution to clean it. Mix equal parts vinegar and water in a bowl and soak the pizza plate in the solution for a few minutes before scrubbing it clean.

What should I do if the pizza plate is warped?

If the pizza plate is warped, do not use it. A warped pizza plate can cause your pizzas to cook unevenly.

…
…

Washing the Roasting Pan

The roasting pan is a crucial component of your Bella air fryer, as it comes into direct contact with the food you cook. Keeping it clean is essential for maintaining the quality of your cooking and the lifespan of your appliance. Here are the steps to effectively clean the roasting pan of your Bella air fryer:

1. Allow the Roasting Pan to Cool

Before handling the roasting pan, let it cool down completely after use. This will prevent you from burning your hands and will make it easier to remove any food residue.

2. Remove Loose Food Particles

Once the roasting pan is cool, gently shake or tap it to remove any loose food particles. Avoid using sharp objects or abrasive sponges, as they can scratch the surface of the pan.

3. Prepare a Cleaning Solution

In a bowl or sink, mix a few drops of mild dish soap with warm water. This will create a cleaning solution that is effective at removing grease and food residue without damaging the pan.

4. Submerge the Roasting Pan

Submerge the roasting pan in the cleaning solution, ensuring that it is completely covered. Let it soak for a few minutes to allow the solution to penetrate and loosen any caked-on food.

5. Clean the Roasting Pan

Using a soft sponge or cloth dipped in the cleaning solution, gently scrub the surface of the roasting pan. Pay particular attention to areas where food may have stuck or burned. Avoid using excessive force or abrasive cleaning tools.

6. Rinse the Roasting Pan

Once the roasting pan has been thoroughly cleaned, rinse it thoroughly under warm running water. Make sure to remove all traces of the cleaning solution.

7. Dry the Roasting Pan

Using a clean kitchen towel or paper towels, pat the roasting pan dry. Alternatively, you can air-dry it by placing it upside down on a drying rack.

8. Additional Cleaning Tips

For stubborn food residue or grease buildup, you can use a non-abrasive cleaning paste or spray. Follow the manufacturer’s instructions carefully.

If the roasting pan has become discolored or stained, you can try using a baking soda paste. Make a paste by mixing baking soda with a small amount of water. Apply the paste to the stained area and let it sit for a few minutes. Then, scrub gently with a soft sponge and rinse thoroughly.

Recommended Cleaning Schedule
Daily or after each use: Remove loose food particles and wipe the roasting pan with a damp cloth.
Weekly or as needed: Submerge the roasting pan in a cleaning solution and scrub gently.
Monthly or as needed: Use a non-abrasive cleaning paste or spray to remove stubborn food residue or grease buildup.

By following these steps, you can effectively clean the roasting pan of your Bella air fryer and maintain its optimal performance over time.

…
…

Drying the Roasting Pan

For optimal performance and longevity of your Bella air fryer, it’s crucial to keep the roasting pan dry. Here’s a detailed guide on how to effectively dry the roasting pan:

Steps for Drying the Roasting Pan:

Unplug the air fryer: Ensure that the air fryer is disconnected from the power source for safety.
Remove the roasting pan: Carefully remove the roasting pan from the air fryer basket.
Drain excess liquid: If there’s any excess liquid or grease in the roasting pan, gently pour it out.
Wipe with a clean towel: Use a clean, absorbent towel to wipe the roasting pan thoroughly, removing any remaining moisture.
Air dry completely: Place the roasting pan upside down on a paper towel or clean dishcloth to allow it to air dry completely. Ensure there’s ample airflow around the pan.
Dry with a hair dryer: Alternatively, you can use a hair dryer on a cool setting to gently blow dry the roasting pan. Keep the hair dryer a safe distance from the pan to avoid scorching.
Set aside to cool: Once the roasting pan is completely dry, set it aside to cool before storing it.

Tips for Keeping the Roasting Pan Dry:

Avoid using too much oil: Excess oil can lead to moisture buildup in the roasting pan. Use a light coating of oil or non-stick spray when necessary.
Line the roasting pan: Placing parchment paper or foil in the roasting pan can help prevent food residue and moisture from accumulating.
Clean the roasting pan regularly: Regularly cleaning the roasting pan after use will prevent grease and moisture from hardening and sticking, making it easier to dry.
Store in a dry place: When not in use, store the roasting pan in a dry and ventilated area to prevent moisture accumulation.

Troubleshooting Dryness Issues:

Issue	Possible Cause	Solution
Roasting pan is not drying completely	Insufficient airflow	Ensure the roasting pan is placed in a well-ventilated area for proper air circulation.
Roasting pan has a musty smell	Trapped moisture	Clean the roasting pan thoroughly, ensuring it is completely dry before storing.
Water droplets on the roasting pan	Condensation	Wipe away the water droplets with a clean towel and allow the pan to air dry completely in a warm environment.

Cleaning the Drip Tray

The drip tray collects grease and debris from the air fryer, so it’s important to clean it after every use. To do this:

Remove the drip tray from the air fryer.
Wash the drip tray with warm, soapy water.
Rinse the drip tray thoroughly and dry it with a clean towel.
Reinsert the drip tray into the air fryer.

Additional Tips for Cleaning the Drip Tray:

Use a non-abrasive sponge or cloth. Abrasive cleaners can damage the drip tray.
Don’t use harsh cleaners. Harsh cleaners can also damage the drip tray.
If the drip tray is particularly dirty, soak it in warm, soapy water for 30 minutes before washing it. This will help to loosen the grease and debris.
Don’t put the drip tray in the dishwasher. The dishwasher can damage the drip tray.
Make sure the drip tray is completely dry before reinserting it into the air fryer. This will help to prevent rust.

How Often Should You Clean the Drip Tray?

You should clean the drip tray after every use. This will help to prevent grease and debris from building up and causing problems with the air fryer.

What Happens if You Don’t Clean the Drip Tray?

If you don’t clean the drip tray, grease and debris can build up and cause the following problems:

The air fryer can overheat. Grease and debris can clog the air vents, which can cause the air fryer to overheat. This can be a fire hazard.
The air fryer can produce smoke. Grease and debris can burn and produce smoke. This can be a nuisance and can also be a health hazard.
The air fryer can produce unpleasant odors. Grease and debris can produce unpleasant odors. These odors can be a nuisance and can also make your food taste bad.
The air fryer can break down. Grease and debris can damage the air fryer’s internal components. This can lead to costly repairs or even replacement.

By cleaning the drip tray after every use, you can help to prevent these problems and keep your air fryer running smoothly.

Cleaning the Drip Tray in Depth

To clean the drip tray in depth, you can use a variety of methods. Here are a few tips:

Use a degreaser. A degreaser can help to break down grease and debris. Apply the degreaser to the drip tray and let it sit for a few minutes. Then, wash the drip tray with warm, soapy water.
Use a baking soda paste. A baking soda paste can also help to break down grease and debris. To make a baking soda paste, mix baking soda with water until it forms a paste. Apply the paste to the drip tray and let it sit for a few minutes. Then, wash the drip tray with warm, soapy water.
Use a vinegar solution. A vinegar solution can also help to break down grease and debris. To make a vinegar solution, mix vinegar with water in a 1:1 ratio. Apply the solution to the drip tray and let it sit for a few minutes. Then, wash the drip tray with warm, soapy water.

After cleaning the drip tray with one of these methods, rinse the drip tray thoroughly and dry it with a clean towel. Then, reinsert the drip tray into the air fryer.

By following these tips, you can keep your Bella air fryer’s drip tray clean and free of grease and debris. This will help to ensure that your air fryer operates safely and efficiently.

Washing the Drip Tray

Step 29: Dry the drip tray

Once the drip tray has been thoroughly washed, it’s time to dry it. You can either air-dry it or use a clean towel to pat it dry. If you’re air-drying it, place it on a clean dish rack or towel and allow it to air-dry completely. If you’re using a towel, gently pat the drip tray with the towel until it’s dry to the touch.

Once the drip tray is completely dry, you can reassemble the air fryer and store it for future use. Be sure to wash the drip tray regularly to prevent grease and food particles from building up.

Additional tips

* If your drip tray has stubborn grease or food particles, you can soak it in hot, soapy water for 30 minutes before washing it. This will help to loosen the grease and make it easier to clean.
* You can also use a dishwashing brush to clean the drip tray. Be sure to scrub the drip tray thoroughly to remove all grease and food particles.
* If you’re using a dishwasher to clean the drip tray, be sure to place it on the top rack of the dishwasher. This will help to prevent the drip tray from getting damaged.
* Once the drip tray has been cleaned, be sure to dry it thoroughly before reassembling the air fryer. This will help to prevent rust and corrosion.

Step	Description
1	Remove the drip tray from the air fryer.
2	Fill a sink with hot, soapy water.
3	Place the drip tray in the soapy water and allow it to soak for 30 minutes.
4	Scrub the drip tray with a dishwashing brush to remove all grease and food particles.
5	Rinse the drip tray thoroughly with hot water.
6	Dry the drip tray with a clean towel.
7	Reassemble the air fryer and store it for future use.

Drying the Drip Tray

After cleaning the drip tray, it’s crucial to dry it thoroughly to prevent rust and ensure its longevity. Here are some detailed steps to effectively dry the drip tray:

Use a Clean Towel

After rinsing the drip tray, use a clean and absorbent towel to gently pat it dry. Avoid using abrasive materials like paper towels, as they can scratch the surface.
Air Dry

Once the drip tray has been patted dry, place it upside down on a clean counter or table to air dry completely. This allows any remaining water droplets to evaporate naturally.
Use a Hairdryer (Optional)

If you’re short on time or want to accelerate the drying process, you can use a hairdryer to blow hot air over the drip tray. Hold the hairdryer at a safe distance and move it around to ensure even drying.
Inspect for Moisture

Before returning the drip tray to the air fryer, check to ensure it is completely dry. Use your fingers to feel for any remaining moisture, especially in the corners and crevices.
Storage

Once the drip tray is completely dry, store it in a clean and dry place away from moisture. Avoid stacking heavy objects on top to prevent deformation.

Cleaning Frequency	Recommended Cleaning Method
After every use	Rinse with hot water
Monthly	Soak in hot soapy water for 15 minutes
As needed	Use a degreaser or vinegar solution to remove stubborn grease

Disengage the lid from the fryer basket. Lift the lid and pull the basket out of the lid. The lid can now be cleaned.

Wipe the lid with a damp cloth. Rinse the lid with clean water and dry it with a clean towel.

Remove any food particles or grease from the lid with a soft brush or sponge.

If the lid is heavily soiled, you can soak it in a solution of warm water and dish soap for 30 minutes before cleaning it.

Cleaning the Lid – Detailed Guide

1. Disconnect the lid from the fryer basket.

Before you begin to clean the lid, you should first disconnect it from the fryer basket. To do this, simply lift the lid and then pull the basket out of the lid. Once the basket is removed, you can set it aside.

2. Wipe the lid with a damp cloth.

Once the lid is disconnected from the basket, you can begin to clean it by wiping it down with a damp cloth. This will help to remove any loose food particles or grease that may be on the surface of the lid.

3. Rinse the lid with clean water.

After you have wiped down the lid with a damp cloth, you should rinse it with clean water to remove any remaining soap or cleaning agents. To do this, simply hold the lid under running water for a few seconds.

4. Dry the lid with a clean towel.

Once the lid has been rinsed, you should dry it with a clean towel to prevent any water spots from forming. To do this, simply pat the lid dry with a towel until it is completely dry.

5. Remove any food particles or grease from the lid with a soft brush or sponge.

If there are any food particles or grease that remain on the lid after you have wiped it down and rinsed it, you can remove them with a soft brush or sponge. To do this, simply dip the brush or sponge into the hot, soapy water and then gently scrub the lid to remove any remaining food particles or grease.

6. If the lid is heavily soiled, you can soak it in a solution of warm water and dish soap for 30 minutes before cleaning it.

If the lid is heavily soiled, you may want to soak it in a solution of warm water and dish soap before cleaning it. To do this, simply fill a bowl with warm water and add a few drops of dish soap. Then, place the lid in the bowl and let it soak for about 30 minutes.

7. Rinse the lid again with clean water and dry it thoroughly.

After you have soaked the lid in the warm water and dish soap solution, you should rinse it again with clean water to remove any remaining soap or cleaning agents. To do this, simply hold the lid under running water for a few seconds.

Once the lid has been rinsed, you should dry it thoroughly with a clean towel to prevent any water spots from forming. To do this, simply pat the lid dry with a towel until it is completely dry.

Washing the Lid

The lid of your Bella air fryer can be cleaned with warm, soapy water. Be sure to rinse the lid thoroughly and dry it completely before using it again.

32. Detailed Lid Cleaning Instructions

For a more thorough cleaning, you can follow these steps:

Step	Instructions
1	Remove the lid from the air fryer.
2	Fill a sink or large bowl with warm, soapy water.
3	Submerge the lid in the water and gently wash it with a soft sponge or cloth.
4	Be sure to get into all the nooks and crannies of the lid, paying special attention to the heating element and any food residue.
5	Once the lid is clean, rinse it thoroughly with clean water.
6	Dry the lid completely with a clean towel or air-dry it.
7	Reassemble the air fryer and enjoy!

Tips:

If your lid is particularly greasy or dirty, you can add a few drops of dish soap to the water.
Be sure to rinse the lid thoroughly to remove any soap residue.
Dry the lid completely before using it again to prevent any moisture from damaging the electrical components.

Drying the Lid

Once the lid has been cleaned and rinsed, it is essential to dry it thoroughly before reattaching it to the air fryer. Failure to do so can lead to moisture buildup within the lid, which can cause unpleasant odors, mold growth, or damage to the air fryer’s components.

Steps for Drying the Lid:

1. Use a clean, dry towel: Take a clean, absorbent towel and gently pat the lid dry. Start from the center and work your way outwards, ensuring that all surfaces are thoroughly dried.
2. Air-dry the lid: If you have time, let the lid air-dry completely. Place it upside down on a clean counter or table and allow it to stand for several hours or overnight. This will allow the remaining moisture to evaporate naturally.
3. Use a fan or hair dryer: If you need to speed up the drying process, you can use a fan or a hair dryer (set on a low heat setting). Aim the fan or hair dryer at the lid’s surface and move it around to ensure even drying.
4. Check for any remaining moisture: Before reattaching the lid, check for any remaining moisture. Use a dry towel to wipe the lid one last time and ensure that all surfaces are completely dry to the touch.

Tips for Drying the Lid:

* Avoid using paper towels: Paper towels may leave behind lint or fibers that can stick to the lid. Instead, opt for a clean, lint-free towel.
* Don’t let the lid soak: Immerse the lid in water for extended periods, as this can damage its electronic components.
* Be patient: Allow the lid to dry completely before reattaching it to prevent moisture-related issues.

Wiping Down the Control Panel

The control panel is the most delicate part of the air fryer, so it’s important to clean it carefully. Here are step-by-step instructions:

Turn off the air fryer and unplug it from the outlet.
Let the air fryer cool completely. This usually takes about 30 minutes.
Wipe down the control panel with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners, as these could damage the control panel.
If there is any stubborn grease or food residue on the control panel, you can use a mild dish soap mixed with water. Apply the solution to the control panel and wipe it clean with a soft cloth.
Be sure to dry the control panel thoroughly with a soft towel before plugging the air fryer back in and using it.

Here are some additional tips for cleaning the control panel of your air fryer:

Wipe down the control panel regularly, even if it doesn’t look dirty. This will help to prevent grease and food residue from building up.
If you spill something on the control panel, clean it up immediately. This will help to prevent the spill from hardening and becoming difficult to remove.
Do not use harsh chemicals or abrasive cleaners on the control panel, as these could damage the finish.
If you are having trouble cleaning the control panel, you can contact the manufacturer for assistance.

Cleaning the Exterior of the Air Fryer

The exterior of the air fryer is much easier to clean than the interior. Here are the steps to follow:

Wipe down the exterior of the air fryer with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners, as these could damage the finish.
If there is any stubborn grease or food residue on the exterior of the air fryer, you can use a mild dish soap mixed with water. Apply the solution to the exterior of the air fryer and wipe it clean with a soft cloth.
Be sure to dry the exterior of the air fryer thoroughly with a soft towel before plugging the air fryer back in and using it.

Uncoiling the Power Cord

Before cleaning your Bella air fryer, it’s crucial to ensure the appliance is unplugged and cooled down. This safety measure minimizes the risk of electric shock and burns.

1. Unplug the Air Fryer:

Disconnect the power cord from the electrical outlet.

2. Uncoil the Cord:

Gently uncoil the power cord to its full length. Avoid kinking or tangling the cord to prevent damage.

3. Inspect the Cord for Damage:

Check the power cord for any signs of damage, such as fraying, cuts, or exposed wires. If any damage is found, do not use the air fryer and contact customer service for assistance.

Here are specific areas to inspect:

Area	Inspection
Plug Connector	Ensure the plug is not cracked, loose, or discolored.
Cord Insulation	Check for any cuts, tears, or thinning in the cord’s insulation.
Cord Joint	Inspect the area where the cord connects to the air fryer for any gaps or damage.

4. Wind the Cord Properly:

Once the cord is inspected, wind it loosely around the designated cord wrap area on the bottom or back of the air fryer.

a. Looping Method:

Form a large loop with the cord and place it over the cord wrap. Wrap the remaining cord around the loop in smaller loops.

b. Figure-8 Method:

Create a figure-8 pattern with the cord and wrap it around the cord wrap in overlapping sections.

5. Store the Air Fryer:

Place the air fryer in a clean, dry location where the cord will not be damaged or entangled.

Reattaching the Power Cord

To reattach the power cord to your Bella Air Fryer, follow these steps:

Unplug the air fryer from the power outlet.
Locate the power cord receptacle on the back of the air fryer.
Align the power cord plug with the receptacle and insert it until it clicks into place.
Plug the air fryer back into the power outlet.

Make sure that the power cord is securely plugged into both the air fryer and the power outlet. A loose connection can prevent the air fryer from operating properly.

Removing Burnt-On Food

Burnt-on food can be a pain to remove, but it’s important to clean your air fryer regularly to prevent build-up and keep it working properly. Here are a few tips for removing burnt-on food from your Bella air fryer:

1. Unplug the air fryer and let it cool down completely.

2. Remove the cooking basket and the crisp plate.

3. Fill the bottom of the air fryer with hot water and a few drops of dish soap.

4. Soak the cooking basket and crisp plate in hot, soapy water for at least 30 minutes.

5. Use a soft brush or sponge to gently scrub away any burnt-on food.

6. Rinse the cooking basket and crisp plate thoroughly with clean water.

7. Dry the cooking basket and crisp plate completely before reassembling the air fryer.

8. If there is still some stubborn burnt-on food, you can try using a baking soda paste.

To make a baking soda paste, mix 1/2 cup of baking soda with 2-3 tablespoons of water.

Apply the baking soda paste to the burnt-on food and let it sit for 30 minutes.

Scrub the burnt-on food with a soft brush or sponge and rinse thoroughly with clean water.

Here is a table summarizing the steps for removing burnt-on food from your Bella air fryer:

Step	Instructions
1	Unplug the air fryer and let it cool down completely.
2	Remove the cooking basket and the crisp plate.
3	Fill the bottom of the air fryer with hot water and a few drops of dish soap.
4	Soak the cooking basket and crisp plate in hot, soapy water for at least 30 minutes.
5	Use a soft brush or sponge to gently scrub away any burnt-on food.
6	Rinse the cooking basket and crisp plate thoroughly with clean water.
7	Dry the cooking basket and crisp plate completely before reassembling the air fryer.
8	If there is still some stubborn burnt-on food, you can try using a baking soda paste.

Following these tips will help you remove burnt-on food from your Bella air fryer quickly and easily.

Storing the Bella Air Fryer in a Cool, Dry Place

Proper storage is essential to ensure the longevity and optimal performance of your Bella Air Fryer. By following these simple steps, you can keep your appliance in top condition for years to come:

1. Unplug the Air Fryer

Before cleaning or storing the air fryer, always unplug it from the power source. This safety measure prevents accidental electrical shock or damage to the appliance.

2. Allow the Air Fryer to Cool Completely

It’s important to wait until the air fryer has cooled completely before cleaning or storing it. This allows the internal components to cool down and prevents any damage or burns.

3. Remove the Cooking Basket and Tray

Once the air fryer has cooled, remove the cooking basket and tray. These parts should be washed separately in warm, soapy water to remove any food residue or grease.

4. Clean the Exterior of the Air Fryer

Use a damp cloth to wipe down the exterior of the air fryer, removing any crumbs or dust. Avoid using abrasive cleaners or sponges, as they can scratch the surface.

5. Clean the Interior of the Air Fryer

To clean the interior of the air fryer, follow these steps:

a. Remove any loose food particles

Use a soft brush or cloth to remove any loose food particles from the interior of the air fryer.

b. Wipe down the heating element

Using a damp cloth, gently wipe down the heating element to remove any grease or food residue. Be careful not to touch the heating element with your bare hands.

c. Clean the fan

Use a vacuum cleaner to remove any dust or debris that has accumulated on the fan. This will help ensure proper air circulation and prevent overheating.

d. Wipe down the interior with a damp cloth

Finally, wipe down the entire interior of the air fryer with a damp cloth to remove any remaining food residue or grease.

6. Dry the Air Fryer Thoroughly

After cleaning, it’s important to dry the air fryer thoroughly before storing it. Use a clean towel to wipe down all surfaces, including the interior, exterior, and cooking basket and tray.

7. Store the Air Fryer in a Cool, Dry Place

Once the air fryer is completely dry, store it in a cool, dry place away from direct sunlight or heat sources. This will help prevent damage to the appliance and ensure that it remains in good working condition.

How to Clean Bella Air Fryers

Bella air fryers are a convenient and healthy way to cook your favorite foods. However, like any other appliance, they need to be cleaned regularly to keep them working properly and to prevent the buildup of bacteria.

Here is a step-by-step guide on how to clean your Bella air fryer:

Unplug the air fryer and let it cool completely. This is important for safety reasons.
Remove the cooking basket and crumb tray. These parts can be washed in the dishwasher or by hand with warm, soapy water.
Wipe down the interior and exterior of the air fryer with a damp cloth. Be sure to get into all the nooks and crannies.
Use a soft brush to remove any food residue from the heating element.
Reassemble the air fryer and plug it back in. Your air fryer is now clean and ready to use!