How to Reset Kwikset Lock Code: A Comprehensive Guide

Have you ever found yourself locked out of your home because you forgot your Kwikset lock code? It can be a frustrating experience, especially if you’re in a hurry. But don’t worry, there is a way to reset your Kwikset lock code without having to call a locksmith. In this article, we will walk you through the step-by-step process of resetting your Kwikset lock code, so you can get back into your home quickly and easily.

Before we begin, it is important to note that there are two different types of Kwikset locks: mechanical and electronic. The steps for resetting the code on a mechanical lock are different from the steps for resetting the code on an electronic lock. In this article, we will provide instructions for both types of locks.

If you have a mechanical Kwikset lock, you will need to use a special tool called a “reset key” to reset the code. Reset keys are available at most hardware stores. Once you have a reset key, follow these steps to reset your Kwikset lock code:
1. Insert the reset key into the lock and turn it to the right.
2. Push in on the reset key and turn it to the left.
3. Release the reset key and turn the lock knob to open the door.
4. Enter your new code into the lock and turn the lock knob to lock the door.
5. Your new code is now set.

Understanding Kwikset Lock Codes

Kwikset locks utilize a sophisticated system of codes to ensure security and ease of access. These codes are crucial for both the initial setup and subsequent operation of your Kwikset lock. Understanding the different types of codes and their respective functions is essential for optimizing your lock’s performance.

Types of Kwikset Lock Codes

Kwikset locks employ two primary types of codes:

1. Master Code: This code serves as the primary access code for your lock. It is used to unlock the door, change the user codes, and perform administrative functions. The master code is typically set during the initial lock setup and should be memorized securely.

2. User Codes: User codes are additional access codes that can be assigned to specific individuals. These codes allow users to unlock the door without knowing the master code. User codes can be created, modified, or deleted as needed.

Master Code Format

The master code for Kwikset locks consists of six digits, each ranging from 0 to 9. The code is typically entered using the keypad located on the front of the lock.

User Code Format

User codes for Kwikset locks can also be six digits in length, following the same format as the master code. However, they can also be set to a shorter length, such as four digits. This flexibility allows you to create codes that are both easy to remember and secure.

Default Master Code

Kwikset locks come with a default master code that is used during the initial setup. This code is usually printed on a label affixed to the back of the lock’s faceplate. It is important to change the default master code as soon as possible to enhance security.

Changing the Master Code

To change the master code on your Kwikset lock, you will need to follow these steps:

1. Enter the existing master code to unlock the door.
2. Press the “Program” button located on the inside of the lock.
3. Enter the new master code, comprising six digits.
4. Press the “Program” button again to save the new code.

Creating and Deleting User Codes

Creating and deleting user codes involves a similar process:

1. Enter the master code to unlock the door.
2. Press the “Program” button twice.
3. For creating a new user code, press the “1” button and then enter the new user code, followed by the “Program” button.
4. For deleting a user code, press the corresponding number button (2-6) and then the “Program” button.

Resetting the Master Code

To reset the master code, you will need to use the programming button located on the inside of the lock. Here is the detailed step-by-step guide on how to reset the master code:

Prepare the lock: Ensure that the lock is unlocked. Locate the programming button. It is usually found on the inside of the lock, near the battery compartment.
Initiate the reset sequence: Press and hold the programming button for 5-7 seconds. You will hear the lock beep once, indicating that it has entered reset mode.
Enter the factory default code: The factory default code is usually “12345”. Enter this code using the keypad.
Confirm the reset: After entering the default code, press the programming button again. You will hear the lock beep twice, confirming that the master code has been reset.
Create a new master code: Enter your desired new master code (6-digits) using the keypad.
Confirm the new code: Press the programming button again. You will hear the lock beep once to indicate that the new master code has been saved.

Note: The reset sequence will erase all existing user codes. Make sure to create a new master code that is secure and easy for you to remember.

Resetting a Sub-Code

To reset a sub-code, follow these steps:

1. Enter the master code using the keypad.
2. Enter the 3 or 6-digit sub-code you want to reset.
3. Reset the code by holding down the “Schlage” button until the lock beeps twice.
4. Enter a new 3 or 6-digit sub-code.
5. Press the “#” key to confirm the new sub-code.

Detailed Guide:

Step 1: Enter the Master Code

Enter the six-digit master code using the keypad. This is the lock’s default master code. The lock will beep once.

Step 2: Enter the Sub-Code to Reset

Enter the 3 or 6-digit sub-code that you want to reset. The lock will beep once.

Step 3: Reset the Code

Hold down the “Schlage” button on the keypad until the lock beeps twice. This signifies that the sub-code has been reset.

Step 4: Enter a New Sub-Code

Enter a new 3 or 6-digit sub-code. You can use any combination of numbers from 0 to 9. The lock will beep once.

Step 5: Confirm the New Sub-Code

Press the “#” key on the keypad to confirm the new sub-code. The lock will beep once to indicate that the new sub-code has been successfully set.

Additional Information:

It is important to note that:

Action	Code
Add a sub-code to the lock	Enter master code + “1” + sub-code + “#”
Reset a sub-code to the default	Enter master code + sub-code + “7” + “0” + “0” + “#”
Remove a sub-code from the lock	Enter master code + sub-code + “6” + “#”

The Importance of Writing Down Codes

When it comes to keeping your home safe and secure, every detail matters. This includes the security of your locks, which are the first line of defense against unwanted visitors. One of the most popular brands of locks on the market is Kwikset, and one of the most common questions Kwikset users have is how to reset the lock code.

If you’ve recently moved into a new home or lost the master code to your Kwikset lock, don’t worry. Resetting the code is a relatively easy process. Just follow these simple steps:

Step 1: Gather your materials

You will need the following materials to reset your Kwikset lock code:

A Phillips head screwdriver
A small piece of paper or a sticky note
A pen or pencil

Step 2: Find the reset button

The reset button on a Kwikset lock is usually located on the inside of the lock, behind the faceplate. To access the reset button, you will need to remove the faceplate with the Phillips head screwdriver.

Step 3: Press the reset button

Once you have found the reset button, press and hold it for about 10 seconds. The lock will beep once, and the code will be reset to the factory default.

Step 4: Program a new code

Now that the lock code has been reset, you can program a new code. To do this, enter the following steps:

Enter the master code into the lock.
Press the “Program” button.
Enter your new code into the lock.
Press the “Enter” button.

Your new code will now be programmed into the lock.

Step 5: Test your new code

Once you have programmed a new code, it is important to test it to make sure that it works. To do this, simply enter the new code into the lock and turn the knob. If the lock opens, then the new code has been successfully programmed.

Step 6: Write down your new code

Once you have tested your new code and made sure that it works, it is important to write it down in a safe place. This will come in handy if you ever forget your code or need to reset it again in the future.

Here is a table summarizing the steps for resetting your Kwikset lock code:

Step	Action
1	Gather your materials.
2	Find the reset button.
3	Press the reset button.
4	Program a new code.
5	Test your new code.
6	Write down your new code.

Resetting Without the Master Code

If you’ve lost your master code or it’s been compromised, you can still reset your Kwikset lock without it. However, this process is more involved and requires some additional steps.

Remove the lock from the door.

Using a screwdriver, remove the two screws that hold the lock in place. Once the screws are removed, carefully pull the lock out of the door.
Locate the reset button.

The reset button is typically located on the back of the lock. It’s a small, round button that’s recessed into the housing. Use a small screwdriver or paperclip to press the reset button.
Hold the reset button for 10 seconds.

Keep holding the reset button for 10 seconds, even if you hear a beep. After 10 seconds, the lock will reset and all old codes will be deleted.
Reprogram the lock.

With the lock reset, you can now reprogram it with a new master code. Refer to your lock’s user manual for specific instructions on how to program a new code.
Reinstall the lock.

Once the lock is reprogrammed, insert it back into the door and secure it with the two screws. Ensure the lock is aligned correctly before tightening the screws.

Considerations

Here are a few important considerations to keep in mind when resetting your Kwikset lock without the master code:

This process will delete all existing codes, including user codes and the master code.
If you have a smart lock that’s connected to a hub or app, resetting the lock will remove it from the system. You’ll need to re-add the lock to the system after resetting.
If you’re unable to reset the lock yourself, contact Kwikset customer support for assistance.

Additional Tips

Here are a few additional tips that may be helpful when resetting your Kwikset lock:

If you’re having trouble finding the reset button, consult your lock’s user manual.
Make sure to press the reset button firmly for 10 seconds. If you don’t hold the button long enough, the lock won’t reset.
Once the lock is reset, be sure to reprogram it with a new master code immediately.

Troubleshooting Resetting Issues

If you are having trouble resetting your Kwikset lock code, there are a few troubleshooting steps you can try:

Ensure You Are Using the Correct Master Code

If you have forgotten your master code, you may need to use the factory default master code. This code can be found on the back of the lock or in the user manual.

Check the Batteries

Weak batteries can prevent your lock from resetting properly. Try replacing the batteries with new ones.

Remove the Deadbolt

In some cases, removing the deadbolt from the lock can help reset it. To remove the deadbolt, use a screwdriver or Allen wrench to loosen the screws that hold it in place.

Contact Kwikset Support

If you have tried all of the above troubleshooting steps and your lock still cannot be reset, contact Kwikset support for assistance. They can provide you with further instructions or send a technician to help you.

Other Troubleshooting Tips

Make sure that the lock is in the unlocked position before attempting to reset it.
Do not enter the same code multiple times. If you enter the code incorrectly, wait for at least 10 seconds before trying again.
If you are using a SmartKey lock, make sure that the key is properly inserted into the lock before attempting to reset it.

Resetting Steps for Kwikset Lock

To reset the code on your Kwikset lock, follow these steps:

Remove the battery cover from the inside of the lock.
Remove the battery.
Press and hold the reset button for 10 seconds.
Reinsert the battery.
Close the battery cover.
Enter the new master code. Make sure to use a code that is easy to remember but not easily guessed.

Once you have completed these steps, your Kwikset lock will be reset and the new master code will be active. Remember to keep your new code confidential and secure.

Assigning New Sub-Codes

Sub-codes allow you to grant temporary or restricted access to your Kwikset lock. You can create up to 30 sub-codes for each lock, each with its unique user code and access level.

To assign a new sub-code:

Enter the master code into the keypad.
Press the “Schlage” button.
Press the number “2” to enter the sub-code programming mode.
Enter the 6-digit user code for the new sub-code.
Press the “Schlage” button.
Enter the desired access level for the sub-code:

1: Guest Access – unlocks the door and overrides any existing guest codes.
2: One-Time Access – unlocks the door once and then expires.
3: Scheduled Access – unlocks the door during specific time periods.

Press the “Schlage” button.
The new sub-code has now been assigned.

Example Scenario:

You want to grant your neighbor temporary access to your home while you’re on vacation. You can assign them a sub-code with a guest access level. This will allow them to unlock the door using the sub-code, but they will not be able to program any new codes or change any settings.

Tips:

Make sure to choose a user code that is easy to remember but not easily guessed.
Keep track of all sub-codes and their associated access levels.
Delete any unused or expired sub-codes to prevent unauthorized access.

Additional Notes:

You can use the same user code for multiple sub-codes.
Only one user code can be active at a time.
If you forget the master code or any sub-code, you can reset the lock to its factory settings.

Factory Resetting a Keypad Lock

If you’ve forgotten your Kwikset lock code or if you’re experiencing other issues with your lock, you may need to factory reset it. Here’s how to do it:

1. Remove the battery cover

The battery cover is located on the back of the lock. Use a screwdriver or a coin to remove the cover.

2. Remove the batteries

Once the battery cover is removed, you’ll see the batteries. Remove the batteries from the lock.

3. Press and hold the reset button

The reset button is located on the inside of the lock, next to the batteries. Press and hold the reset button for 10 seconds.

4. Reinsert the batteries

Once you’ve held the reset button for 10 seconds, reinsert the batteries into the lock.

5. Replace the battery cover

Replace the battery cover and tighten the screw.

6. Enter the default code

The default code for Kwikset locks is 12345. Enter this code into the keypad to unlock the lock.

7. Create a new code

Once you’ve unlocked the lock, you can create a new code. Enter the new code into the keypad and press the # key.

8. Test the new code

Try entering the new code into the keypad to make sure it works.

9. Troubleshooting

If you’re having trouble factory resetting your Kwikset lock, here are a few troubleshooting tips:

Issue	Solution
I can’t find the reset button.	The reset button is located on the inside of the lock, next to the batteries.
I pressed the reset button but the lock didn’t reset.	Make sure that you pressed and held the reset button for 10 seconds.
I entered the default code but the lock didn’t unlock.	The default code for Kwikset locks is 12345. Make sure that you’re entering the correct code.

10. Additional information

Here are some additional things to keep in mind about factory resetting your Kwikset lock:

Factory resetting your lock will erase all of the codes that have been programmed into it.
If you have a SmartCode lock, you will need to use the SmartCode app to factory reset it.
If you’re still having trouble factory resetting your lock, you can contact Kwikset customer service for help.

Resetting a Turn-Key Deadbolt

1. Turn the inside knob clockwise to unlock the door.

2. Use a flathead screwdriver to remove the screws from the interior faceplate of the deadbolt.

3. Remove the faceplate to expose the internal mechanisms.

4. Locate the reset button on the back of the lock mechanism. It will usually be a small, round, black button.

5. Press and hold the reset button for 10 seconds.

6. While holding the reset button, turn the interior knob counterclockwise to lock the door.

7. Release the reset button and the interior knob.

8. The lock code has now been reset and can be reprogrammed with a new code.

Detailed Step-by-Step Instructions

Step 1: Prepare the Lock

* Gather the necessary tools: a small flathead screwdriver and a new key (if desired).
* Ensure the door is unlocked and open before proceeding.

Step 2: Remove the Faceplate

* Locate the screws securing the faceplate.
* Use the flathead screwdriver to carefully remove these screws.
* Gently lift the faceplate off the lock mechanism.

Step 3: Locate the Reset Button

* Once the faceplate is removed, you will see the internal lock mechanism.
* The reset button is typically a small, round, black button located on the back of the mechanism.

Step 4: Reset the Lock

* Press and hold the reset button for exactly 10 seconds.
* Do not release the button until the full 10 seconds have elapsed.

Step 5: Lock the Door

* While continuing to hold the reset button, turn the interior knob counterclockwise to engage the lock.

Step 6: Release the Reset Button

* After the door is locked, release the reset button.
* Turn the knob back to the unlocked position.

Step 7: Test the Lock

* Attempt to open the door using the old key. It should no longer work.
* If a new key is available, insert it and try to lock and unlock the door. This will confirm the reset process was successful.

Additional Notes

* If the reset button is not easily accessible, you may need to use a long, thin object to press it.
* Make sure to press the reset button firmly. A weak press may not fully reset the lock.
* Once the lock is reset, you will need to reprogram it with a new code. See the manufacturer’s instructions for specific steps.

Choosing a New Master Code

When selecting a new master code for your Kwikset lock, it’s crucial to choose a combination that is both secure and easy for you to remember. Here are some guidelines to consider:

Avoid using default or common codes like “1234” or “0000”.
Create a code that is at least 6 digits long for enhanced security.
Combine numbers and letters for greater complexity.
Try to avoid using sequential numbers or repeating digits.
Select a code that is meaningful to you but not easily guessed by others.

Once you have chosen a new master code, follow these steps to reset the code on your Kwikset lock:

1. Remove the battery cover from the lock and press the “Reset” button.
2. Enter your new master code and press the “Lock” button.
3. The lock will beep and the new code will be programmed.


Default Master Code:	12345
Minimum Code Length:	5 digits
Maximum Code Length:	6 digits

Note: If you have lost or forgotten your master code, you can use the Kwikset SmartKey rekeying kit to reset the lock to its default settings.

Resetting Kwikset Lock Code

1. Gather Necessary Tools

Screwdriver
Small magnet
9-volt battery

2. Identify Lock Type

Deadbolt: Keypad on the outside, thumb latch on the inside
Doorknob: Keypad on the doorknob

3. Remove Battery Cover

Locate the screw on the bottom/side of the lock.
Use a screwdriver to remove the screw and battery cover.
Disconnect the battery.

4. Access Programming Buttons

Deadbolt: Use a small magnet to press the programming button hidden behind the battery connection.
Doorknob: Press the programming button on the keypad.

5. Enter Factory Code

For deadbolts, the factory code is usually 123456.
For doorknobs, the factory code is printed on the inside of the battery cover.

6. Change Lock Code

Press the "*" button once.
Enter the new 6-digit code.
Press the "*" button again to confirm.

7. Reconnect Battery

Reinstall the battery into the lock.
Replace the battery cover and screw.

8. Test New Code

Enter the new code on the keypad.
If the lock unlocks, the reset was successful.

9. Reset Failed?

If the lock doesn’t unlock, try resetting again.
If it still doesn’t work, contact the manufacturer.

Using Strong and Long Passwords

10. Importance of Strong Passwords

Protects your home from unauthorized entry.
Prevents lock picking or code guessing.

11. Characteristics of a Strong Password

Length: 6 or more digits.
Complexity: Avoid consecutive numbers or patterns.
Uniqueness: Don’t use the same code for multiple locks.

12. Common Password Attacks

Brute Force: Trying all possible combinations until the correct code is found.
Shoulder Surfing: Observing someone entering the code.
Social Engineering: Tricking someone into revealing the code.

13. Generating Strong Passwords

Use random number or letter sequences.
Consider using a mnemonic phrase (e.g., "My cat’s name isFluffy123").
Avoid using names, birth dates, or other easily guessable information.

14. Tips for Choosing a Long Password

Length: Aim for 8 or more digits.
Memorability: Choose a code that is easy for you to remember but not obvious to others.
Security: The longer the code, the harder it is to brute force.
Example: A secure long password could be "Yellow765Orange1498".

Keeping Codes Confidential

The security of your home depends heavily on the confidentiality of your Kwikset lock codes. To protect your codes from unauthorized access, follow these best practices:

1. Limit Access to Codes: Restrict the number of people who have access to the lock codes. Only share codes with trusted individuals, and avoid sharing them with someone who may use them without your knowledge.

2. Use Strong Codes: Avoid using common codes like “1234” or “0000.” Instead, choose unique and complex codes that are difficult to guess. Consider using a combination of numbers and letters, or even random symbols.

3. Change Codes Regularly: Regularly update your lock codes, especially if you believe they may have been compromised. Changing codes will prevent unauthorized individuals from accessing your home, even if they have previously learned the old code.

4. Avoid Writing Codes Down: Never write down your lock codes on paper or store them digitally in an unencrypted format. If someone gains access to these written codes, they can easily compromise your home security.

5. Be Aware of Social Media: Be cautious about sharing information about your lock or codes on social media platforms. Avoid posting pictures of your door or lock that could reveal its details. Additionally, be wary of strangers who may try to extract information from you.

6. Install a Tamper-Resistant Lock: Consider installing a tamper-resistant lock that makes it difficult for unauthorized individuals to physically compromise the lock or access the codes.

7. Store Codes Securely: If you must write down the lock codes, store them in a secure location that is inaccessible to others. Consider using a password-protected safe or a digital password manager.

8. Educate Family and Visitors: Inform your family and visitors about the importance of keeping codes confidential. Explain the risks of sharing codes with unauthorized individuals and the consequences of doing so.

9. Monitor Lock Activity: Keep track of the lock’s access history to identify any unusual or suspicious activity. If you notice anything out of the ordinary, such as multiple failed attempts or frequent unlocks, consider changing the codes immediately.

10. Contact Kwikset Support: If you experience any issues with the lock codes or suspect that they have been compromised, contact Kwikset support immediately. They can provide guidance and assist you in resetting the codes or resolving any security concerns.

Resetting Multiple Locks Simultaneously

Resetting multiple Kwikset locks simultaneously can be a time-saving solution for those with multiple locks in their home or business. Here’s a detailed guide on how to reset multiple Kwikset locks at once:

Materials Required:

Kwikset SmartKey Security Card
Programmable Kwikset Lock

Step-by-Step Instructions:

Prepare the Locks:
Ensure all the locks you want to reset are in the “unlocked” position.
Insert the Master Key:
Insert the Master Key, which typically comes with a new Kwikset lock, into the first lock.
Enter the Reset Code:
Turn the key counterclockwise to the “Code” position (90 degrees) and then back to the “Set” position (180 degrees). This is the universal reset code.
Remove the Key:
Remove the Master Key from the lock.
Re-Insert the Key:
Insert the Master Key into the lock again.
Enter the New Code:
Turn the key counterclockwise to the “Code” position and then back to the “Set” position to set the first digit of your new code. Repeat this step to set the remaining digits.
Remove the Key:
Remove the Master Key from the lock.
Repeat for Other Locks:
Insert the Master Key into each subsequent lock and repeat steps 3-7 to reset them to the same new code.

Test the Locks:

Once all the locks have been reset, use the new code to unlock each lock and ensure they are operating correctly.

Additional Notes:

If you lose the Master Key, you can order a new one from Kwikset.
The reset code is a universal code and does not provide any additional security protection.
Consider using a unique code for each lock, especially if you want to maintain separate access control for different locks.

Resetting multiple Kwikset locks simultaneously is a convenient way to synchronize your locks and establish a consistent access code. By following these steps carefully, you can ensure the locks are properly reset and secured.

Managing Codes for Multiple Users

Kwikset locks offer the convenience of managing multiple user codes, allowing you to grant access to your home to family members, friends, or renters. Here’s a comprehensive guide to help you set up and manage codes for multiple users:

1. Determine the Number of Users

Start by determining how many users will need access to your lock. Kwikset locks support up to 30 user codes, so you can accommodate a wide range of needs.

2. Create a Master Code

The master code is the primary code that grants full access to the lock and allows you to add or delete user codes. You should keep this code confidential and only share it with trusted individuals.

3. Add User Codes

To add a user code, follow these steps:

Press the “Program” button on the keypad.
Enter the master code.
Press the “1” or “2” button to select a user slot.
Enter the desired user code (4-8 digits).
Press the “Program” button to save the code.

4. Delete User Codes

To delete a user code, follow these steps:

Press the “Program” button on the keypad.
Enter the master code.
Press the “1” or “2” button to select the user slot.
Press and hold the “#” button for 3 seconds.

5. Change User Codes

To change a user code, follow the same steps for adding a user code. Once you select the desired user slot, simply enter the new code and press the “Program” button.

6. Assign Access Levels

With certain Kwikset models, you can assign different access levels to user codes. This allows you to control who can lock and unlock the door, as well as view activity logs.

7. Lock and Unlock with User Codes

To lock the door with a user code, simply enter the code on the keypad and press the “Lock” button. To unlock the door, enter the code and press the “Unlock” button.

8. View Activity Logs

Some Kwikset models allow you to view activity logs, which show who has accessed the lock and when. This information can be useful for tracking usage and identifying possible security breaches.

9. Reset the Lock

If you lose the master code or need to erase all user codes, you can reset the lock to its factory settings. This will erase all codes and require you to reconfigure the lock from scratch.

10. Manage Codes with a Smartphone App

For Kwikset locks with Bluetooth or Wi-Fi connectivity, you can use the Kwikset app to manage user codes remotely. This allows you to add, delete, or change codes from anywhere.

11. Troubleshooting

If you encounter any issues while managing user codes, here are some troubleshooting tips:

Issue	Solution
Can’t add or delete user codes	Ensure you’re entering the master code correctly. If not, reset the lock.
User codes don’t work	Check if the codes are entered correctly. Reset the lock if necessary.
Activity logs show incorrect information	Reset the lock and reconfigure all user codes.

Creating a Panic Code

A panic code, also known as a master code, is a special code that can be used to unlock your Kwikset lock in case you forget your regular code. It is important to create a panic code and keep it in a safe place in case of an emergency.

To create a panic code, follow these steps:

Enter your regular user code into the keypad.
Press the * key.
Enter a 6-digit panic code.
Press the # key.

Your panic code has now been created. To use it, simply enter the code into the keypad when you need to unlock your lock.

Additional Tips for Creating a Panic Code

Choose a code that is easy to remember but difficult for others to guess.
Do not use your regular user code as your panic code.
Keep your panic code in a safe place where you can easily access it in case of an emergency.
Test your panic code periodically to make sure that it is working properly.

Here are some additional details about creating a panic code:

The panic code can be changed at any time by following the steps above.
The panic code is not case-sensitive.
If you forget your panic code, you can reset it by following the instructions in the “Resetting Your Lock” section.

Creating a panic code is a simple and effective way to ensure that you can always access your home in case of an emergency. Be sure to follow the steps above carefully and keep your panic code in a safe place.

Programming a Temporary Code

Temporary codes are ideal for scenarios where you need to grant temporary access to a guest or service provider without altering the permanent code. Kwikset locks offer the flexibility to create temporary codes that can be used for a specified duration, ranging from 24 to 60 hours. Here’s a step-by-step guide to programming a temporary code:

Unlock the door using your master code.
Press the “Program” button located on the interior side of the door near the keypad. The lock will emit a single beep.
Within 3 seconds, enter the temporary code you wish to create (4-8 digits). The lock will beep twice to confirm the first digit.
Re-enter the same temporary code to confirm it. The lock will beep twice again to confirm the second digit.
Press the “Program” button again to save the temporary code. The lock will beep three times to indicate successful programming.
Use the temporary code to unlock the door.
The temporary code will automatically expire after the specified duration (24 or 60 hours).
To create a new temporary code, simply repeat the steps from the beginning.

Additional Considerations for Programming Temporary Codes:

You can only have one temporary code active at a time.
The temporary code will not override the master code.
If you forget the temporary code, you can use the master code to unlock the door and delete the temporary code.
Some Kwikset models allow you to program multiple temporary codes simultaneously, providing greater flexibility for managing access to your home.

Programming Temporary Codes for Specific Time Periods:

Certain Kwikset models offer the ability to program temporary codes with specific start and end times. This advanced feature allows you to grant access for a precise duration, ensuring that the code is only active during the intended period. Here are the steps for programming a temporary code with a specific time period:

Step	Action
1	Unlock the door using your master code.
2	Press and hold the “Program” button for 3 seconds.
3	Enter the temporary code (4-8 digits).
4	Press the “*9” button.
5	Enter the start time (4 digits: HHMM).
6	Enter the end time (4 digits: HHMM).
7	Press the “Program” button.

Once the temporary code is programmed, it will be active only during the specified start and end times. After the end time has passed, the code will automatically expire.

Note that not all Kwikset models support this feature. Refer to your user manual to determine if your specific model offers temporary code programming with time restrictions.

Deleting Codes

To delete codes from your Kwikset lock, you will need to use the programming key that came with the lock. This key is typically a small, black key that has a hole in the top. If you have lost or misplaced the programming key, you can order a replacement from Kwikset.

Once you have the programming key, follow these steps to delete codes:

Remove the battery cover from the back of the lock.
Locate the programming button on the back of the lock.
Insert the programming key into the programming button and turn it clockwise until you hear a click.
Enter the master code. The master code is the first code that you programmed into the lock.
Press the asterisk (*) button to delete the code.
Repeat steps 3-5 for each code that you want to delete.
Remove the programming key from the programming button and turn it counterclockwise to lock it.
Replace the battery cover.

Deactivating a Lost Key

If you have lost a key, it is important to deactivate it as soon as possible to prevent unauthorized access to your home. Here are the steps on how to do so:

1. Gather Your Materials

You will need the following items:

* Your Kwikset lock
* A Phillips screwdriver
* A new key

2. Remove the Lock’s Faceplate

Use the Phillips screwdriver to remove the screws that hold the lock’s faceplate in place. Carefully lift off the faceplate to expose the lock’s interior.

3. Locate the Reset Button

The reset button is usually located on the side of the lock’s interior mechanism. It may be a small, recessed button or a small hole.

4. Insert the New Key

Insert the new key into the lock and turn it to the locked position.

5. Press the Reset Button

While holding the key in the locked position, use a small object (such as a paperclip or a pen) to press the reset button. Hold the button down for a few seconds until you hear a click.

6. Release the Key

Release the key and remove it from the lock.

7. Test the Lock

Try unlocking the lock with the old key. It should no longer work. The new key should now be the only one that can unlock the lock.

8. Reinstall the Faceplate

Replace the lock’s faceplate and tighten the screws to secure it in place.

Additional Tips

If you cannot find the reset button, consult your lock’s user manual or contact Kwikset customer support.
It is a good idea to deactivate lost keys as soon as possible, even if you have not yet found a replacement key.
You can also purchase a keyless entry system to further enhance the security of your home.

Table: Key Reset Methods

Lock Type	Reset Method
Single-cylinder deadbolt	Follow the steps outlined above
Double-cylinder deadbolt	Remove the lock from the door and follow the manufacturer’s instructions for resetting the lock
Electronic lock	Follow the manufacturer’s instructions for resetting the lock

Activating a Found Key

Step 1: Locate the SmartKey Re-key Kit. If you don’t have one, you can purchase a new kit from the Kwikset website or a home improvement store.

Step 2: Insert the learning key into the lock. Make sure the key is fully inserted and that the arrow on the key is pointing up.

Step 3: Rotate the learning key clockwise 90 degrees. You will hear a click.

Step 4: Remove the learning key from the lock.

Step 5: Insert the found key into the lock. Make sure the key is fully inserted and that the arrow on the key is pointing up.

Step 6: Rotate the found key clockwise 90 degrees. You will hear a click.

Step 7: Repeat steps 5 and 6 eight more times. Each time you turn the key, you will hear a click.

Step 8: Remove the found key from the lock.

Step 9: Insert the original key into the lock. Make sure the key is fully inserted and that the arrow on the key is pointing up.

Step 10: Rotate the original key clockwise 90 degrees. You will hear a click.

Step 11: Remove the original key from the lock.

Step 12: The lock is now re-keyed to the found key. You can now use the found key to unlock the door.

Important: If you don’t have a SmartKey Re-key Kit, you can still change the lock’s code by following the steps above. However, you will need to have a locksmith create a new key for you.

Resetting a Rental Property Lock

Resetting the lock code on a Kwikset lock is a simple and straightforward process that can be completed in just a few minutes. This is especially useful for rental properties, where you need to change the lock code between tenants.

Materials You Will Need:

Kwikset lock
Small Phillips head screwdriver
New lock code (optional)

Step-by-Step Instructions:

Remove the faceplate from the lock by unscrewing the two screws located on either side of the handle.
Locate the reset button on the back of the lock. It is usually a small, black button located near the top or bottom of the lock.
Press and hold the reset button for 5 seconds. The lock will beep once to indicate that it has been reset.
Release the reset button.
If you want to change the lock code, enter your new code by pressing the numbers on the keypad. The lock will beep once to indicate that the code has been changed.
Reinstall the faceplate by screwing it back into place.
Test the lock by entering your new code. The lock should unlock if the code is entered correctly.

Additional Tips:

If you have trouble resetting the lock, try pressing the reset button for a longer period of time.
If you have forgotten your lock code, you can contact Kwikset customer service for assistance.
It is a good idea to reset the lock code whenever you move into a new rental property.

Troubleshooting:

Problem	Solution
The lock does not beep when I press the reset button.	Press and hold the reset button for a longer period of time.
The lock beeps twice when I enter my new code.	The new code is not valid. Enter a new code that is between 4 and 8 digits long.
The lock does not unlock when I enter my new code.	The lock may not have been reset properly. Try resetting the lock again.

Changing Codes for Landlord Access

If you’re a landlord or property manager, you may need to access your tenants’ units for maintenance or emergencies. To do so, you’ll need to have a way to reset the lock codes so that you can enter the unit without having to disturb your tenants. Here’s a step-by-step guide on how to reset Kwikset lock codes for landlord access:

1. Gather Your Materials

You will need the following materials:

A Kwikset reset key
A new lock code

2. Insert the Reset Key

Locate the reset button on the bottom of the lock. Insert the reset key into the button and turn it clockwise until it stops. This will put the lock into programming mode.

3. Enter the Master Code

The master code is the default code that is used to program the lock. If you have not changed the master code, it is 12345. Enter the master code using the keypad.

4. Enter the New Lock Code

Once you have entered the master code, the lock will beep. This indicates that you are now in programming mode. Enter the new lock code using the keypad. The new lock code can be any 6-digit number.

5. Press the # Key

Once you have entered the new lock code, press the # key. This will save the new lock code and exit programming mode.

6. Test the New Lock Code

To test the new lock code, enter it using the keypad. The lock should now unlock. If the lock does not unlock, repeat steps 2-5.

7. Remove the Reset Key

Once you have successfully tested the new lock code, remove the reset key from the button. The lock is now reset and ready to use.

Additional Tips

Here are some additional tips for resetting Kwikset lock codes:

If you have lost your reset key, you can order a new one from Kwikset.
You can also reset the lock code using the Kwikset SmartKey app.
If you are having trouble resetting the lock code, you can contact Kwikset customer service for assistance.

Step	Action	Result
1	Gather materials	You will need a reset key and a new lock code.
2	Insert the reset key	This will put the lock into programming mode.
3	Enter the Master Code	The default code is 12345.
4	Enter the New Lock Code	The new lock code can be any 6-digit number.
5	Press the # Key	This will save the new lock code.
6	Test the New Lock Code	Enter the new lock code using the keypad to test it.
7	Remove the Reset Key	The lock is now reset and ready to use.

Resetting a Lost or Forgotten Code

In the event that you’ve misplaced or forgotten the access code for your Kwikset lock, you can reset it by following these steps:

Step 1: Remove the battery cover.

Locate the battery cover on the inside of the lock. Using a small screwdriver or coin, gently pry open the cover.

Step 2: Remove the battery.

Once the battery cover is open, remove the 9-volt battery. This will temporarily disable the lock.

Step 3: Press and hold the reset button.

While the battery is out, locate the small reset button on the inside of the lock. Use a paperclip or a similar pointed object to press and hold the reset button.

Step 4: Reinstall the battery while holding the reset button.

Keep holding down the reset button and reinsert the 9-volt battery into the lock. Continue holding the reset button for approximately 10 seconds.

Step 5: Release the reset button.

After 10 seconds, release the reset button. The lock should now be reset to the factory default code.

Step 6: Enter the factory default code.

The factory default code for Kwikset locks is typically "12345." Enter this code using the keypad on the lock.

Step 7: Create a new code.

Once the factory default code has been entered, you can create a new access code. Enter the new code twice using the keypad. The lock will beep to confirm that the new code has been programmed.

Step 8: Replace the battery cover.

Once you have created a new access code, replace the battery cover and secure it tightly. Your lock should now be fully reset with the new access code.

Additional Tips for Resetting a Lost or Forgotten Code

If you are having difficulty resetting the lock using the steps above, refer to the user manual that came with the lock.
If you have lost the user manual, you can download a copy from the Kwikset website.
If you are still unable to reset the lock, you may need to contact a locksmith for assistance.

Troubleshooting Reset Errors

If you encounter any issues while resetting your Kwikset lock, here are some troubleshooting tips:

**Error Message:** “Invalid Code”

**Solution:** Ensure that you are entering the factory default code or the new access code correctly.

**Error Message:** “Lock does not reset”

**Solution:** Verify that you are holding down the reset button for the full 10 seconds while reinstalling the battery.

**Error Message:** “Keypad not responding”

**Solution:** Check the battery connections to ensure they are secure and clean. If necessary, replace the battery with a new one.

Error	Solution
Invalid Code	Ensure correct code entry.
Lock does not reset	Hold down reset button for 10 seconds.
Keypad not responding	Check battery connections.

Resetting a Kwikset Obsidian Lock

1. Locate the Reset Button

The reset button is usually located inside the battery compartment, below the lock’s keypad. You may need to remove the battery cover to access it.

2. Press and Hold the Reset Button

Once you have located the reset button, press and hold it for approximately 10 seconds, or until the keypad lights up and the lock beeps thrice.

3. Enter the Default Code

After resetting the lock, you need to enter the default code to unlock it. The default code is usually printed on the back of the lock or in the user manual. Enter the code and press the “Enter” button.

4. Create a New User Code

Once the lock is unlocked, you can create a new user code. Press the “Program” button on the keypad, enter the new code, and then press the “Enter” button. The new code will now be stored in the lock’s memory.

5. Test the New Code

Once you have created a new user code, test it by entering it on the keypad and pressing the “Enter” button. The lock should unlock if the code is correct.

6. Reinstall the Battery Cover

After testing the new code, reinstall the battery cover to protect the reset button and the batteries.

7. Additional Tips

If you forget the new user code, you can reset the lock again and create a new one. You can also add or delete user codes as needed. Refer to the user manual for specific instructions on how to do this.

8. Factory Reset

To perform a factory reset, press and hold the reset button for 20 seconds. The lock will beep four times, indicating that it has been reset to factory settings. All user codes will be deleted.

9. Troubleshooting

If you encounter any problems while resetting your Kwikset Obsidian lock, try the following troubleshooting steps:

Problem	Solution
The keypad is not lighting up.	Make sure that the batteries are properly installed and have enough power.
The lock is not unlocking with the default code.	Ensure that you are entering the correct default code. The default code is usually printed on the back of the lock or in the user manual.
The lock is not responding to the reset button.	Press the reset button firmly and hold it for at least 10 seconds. If the problem persists, try replacing the batteries.

10. Contact Kwikset Support

If you continue to have problems resetting your Kwikset Obsidian lock, contact Kwikset customer support for assistance. They can provide you with additional troubleshooting tips or arrange for a replacement lock.

Resetting a Kwikset Kevo Lock

To reset a Kwikset Kevo lock, perform the following steps:

Enter the existing lock code.
Press the “Schlage” button.
Enter “222222” as the new lock code.
Press the “Schlage” button again.

Alternative Method for Kevo Lock Reset

If the above method does not work, you can use this alternative method:

Use a paperclip or similar object to press and hold the reset button on the interior of the lock for at least 10 seconds.
The lock will beep and the LED will flash red. This indicates that the lock has been reset to factory settings.
You will need to re-create your lock code and program it into the lock.

Removing Kevo Lock Code from the Kevo App

Once the lock has been reset, you can remove the existing lock code from the Kevo app by following these steps:

Open the Kevo app on your smartphone.
Select the lock you want to reset.
Tap on the “Lock Settings” tab.
Under the “Security” section, tap on “Remove Lock Code.”
Enter your master key code.
Tap on “Remove Lock Code.”

Resetting a Kwikset Smart Lock

To reset a Kwikset Smart Lock, perform the following steps:

Remove the battery cover on the interior of the lock.
Remove the batteries.
Wait 10 seconds.
Reinsert the batteries.
Reinstall the battery cover.
The lock will beep and the LED will flash red. This indicates that the lock has been reset to factory settings.
You will need to re-create your lock code and program it into the lock.

Alternative Method for Smart Lock Reset

If the above method does not work, you can use this alternative method:

Use a paperclip or similar object to press and hold the reset button on the interior of the lock for at least 10 seconds.
The lock will beep and the LED will flash red. This indicates that the lock has been reset to factory settings.
You will need to re-create your lock code and program it into the lock.

Removing Smart Lock Code from the Kwikset App

Once the lock has been reset, you can remove the existing lock code from the Kwikset app by following these steps:

Open the Kwikset app on your smartphone.
Select the lock you want to reset.
Tap on the “Settings” tab.
Under the “Security” section, tap on “Remove Lock Code.”
Enter your master key code.
Tap on “Remove Lock Code.”

Resetting a Kwikset Conventional Lock

To reset a Kwikset conventional lock, perform the following steps:

Insert the key into the lock and turn it to the unlocked position.
While holding the key in the unlocked position, use a screwdriver to turn the set screw located on the bottom of the lock clockwise.
Turn the set screw until it stops.
Release the key and the set screw.
The lock has now been reset to factory settings.
You will need to re-create your key and program it into the lock.

Alternative Method for Conventional Lock Reset

If the above method does not work, you can use this alternative method:

Remove the lock from the door.
Turn the lock upside down and remove the screws that hold the backplate in place.
Remove the backplate and locate the reset button.
Use a paperclip or similar object to press and hold the reset button for at least 10 seconds.
Reassemble the lock and install it back on the door.
The lock has now been reset to factory settings.
You will need to re-create your key and program it into the lock.

Removing Conventional Lock Code from the Kwikset App

Kwikset conventional locks do not have a code that can be removed from the Kwikset app.

Resetting a Kwikset SmartCode Lock

If you’ve forgotten your Kwikset SmartCode lock’s code or need to reset it for any other reason, you can follow these steps:

1. Gather Your Tools

You will need a Phillips screwdriver and a paperclip or similar object to reset your Kwikset SmartCode lock.

2. Remove the Battery Cover

Locate the battery cover on the back of the lock and remove it using the Phillips screwdriver.

3. Remove the Batteries

Remove the batteries from the lock.

4. Locate the Reset Button

Once the batteries are removed, you will see a small reset button located on the back of the lock.

5. Press and Hold the Reset Button

Use the paperclip or other pointed object to press and hold the reset button for about 10 seconds.

6. Reinsert the Batteries

Once you release the reset button, reinsert the batteries into the lock.

7. Replace the Battery Cover

Replace the battery cover on the back of the lock.

8. Enter the New Code

Enter your new six-digit code into the keypad.

9. Press the Lock Button

Press the lock button to save your new code.

10. Test the New Code

Try entering your new code to make sure it works.

29. Replacing the Code After Performing a Hard Reset

After performing a hard reset, it’s important to replace the code immediately to ensure the security of your lock. Here’s how you can do it:

Materials required:

Small screwdriver
Pen or paper clip

Step 1: Remove the back cover

Use the screwdriver to remove the screws holding the back cover of the lock. Carefully lift off the cover.

Step 2: Locate the program button

Inside the lock, you’ll find a small button labeled “Program” or “Prog.” It’s usually located near the battery compartment.

Step 3: Press and hold the program button

Use the pen or paper clip to press and hold the program button for about 5 seconds. The lock will emit a series of beeps.

Step 4: Enter the new code

While holding the program button, enter the new 6-digit code you want to use. The lock will beep once for each digit entered.

Step 5: Release the program button

Once you’ve entered the new code, release the program button. The lock will beep twice to confirm the code change.

Step 6: Test the new code

Enter the new code on the keypad to verify that it works. If the code is entered correctly, the lock will unlock.

Additional notes:

Choose a code that is easy to remember but difficult to guess.
Avoid using common sequences like “123456” or “987654.”
If you forget your new code, you can reset the lock again and set a new one following the same steps.

Troubleshooting Connection Issues

1. Ensure the batteries are fresh and properly inserted.

Weak or improperly inserted batteries can cause connection issues. Check if the batteries are new or recently replaced. Ensure they are inserted correctly, matching the positive (+) and negative (-) terminals.

2. Reset the lock to factory settings.

Resetting the lock to factory settings can resolve connection problems. For Kwikset locks, follow these steps:

Remove the batteries from the lock.
Press and hold the Schlage button for 10 seconds.
Reinsert the batteries while continuing to hold the Schlage button.
Release the Schlage button after 3 seconds.

3. Remove and re-add the lock to the app.

Removing and re-adding the lock to the app can resolve connection issues. In the app:

Go to the “Devices” section.
Find the problematic lock and tap on it.
Tap on the “Remove Device” option.
Follow the app’s instructions to re-add the lock.

4. Check your router and internet connection.

Ensure your router is functioning properly and the internet connection is stable. A weak or intermittent internet connection can affect the lock’s connectivity.

5. Update the app to the latest version.

Outdated apps may cause compatibility issues. Ensure you have the latest version of the app installed on your device.

6. Physical interference

Physical barriers, such as thick walls or electronic devices, can interfere with wireless signals. Ensure the lock is not obstructed and is within range of the router.

7. Warranty information

Most Kwikset locks come with a limited lifetime mechanical and finish warranty and a one-year electronics warranty. If you experience any connection issues within the warranty period, contact Kwikset customer support for assistance.

8. Locking Mechanism Issues

If the lock is not responding to commands or is not locking or unlocking properly, it may be experiencing mechanical issues. Inspect the lock for any visible damage or obstructions. Ensure the deadbolt is aligned correctly and the latch is not jammed.

9. Keypad Problems

Keypad issues can prevent you from entering the correct code or using the lock’s features. Check if the keypad is clean and free from debris. If the buttons are not responding, try using a different code or resetting the lock to factory settings.

10. Low Battery Warning

A low battery warning indicates that the batteries are running low and need to be replaced soon. When the battery is too low, the lock may not function properly or may stop responding to commands. Replace the batteries as soon as possible to avoid any interruptions.

Understanding Error Codes

When programming or using a Kwikset lock, you may encounter error codes that indicate a problem or issue. Understanding these error codes can help you troubleshoot and resolve the problem quickly.

Here are some of the most common error codes and their meanings:

Error Code	Meaning	Possible Solution
E1	Invalid programming code entered	Check the programming code and re-enter it carefully.
E2	Lock is already programmed with the same code	Use a different programming code.
E3	Lock is not in programming mode	Put the lock in programming mode by pressing the programming button.
E4	Lock is not accepting new codes	The lock’s memory is full. Delete some existing codes and try again.
E5	Low battery	Replace the batteries.
E6	Incorrect keyway	The lock is not compatible with the keyway of the door.
E7	Mechanical failure	Contact Kwikset customer support for assistance.

Error Code 31: Tamper Alarm

Error code 31 indicates that the lock’s tamper alarm has been triggered. This can occur if someone attempts to forcibly open the lock or if the lock’s components have been tampered with.

There are several possible causes for error code 31, including:

Someone has tried to pick or pry the lock.
Someone has hit or shaken the lock.
The lock has been exposed to extreme temperatures.
The lock’s internal components have become damaged.

If you see error code 31, it is important to inspect the lock for any signs of damage. If you find any damage, you should contact Kwikset customer support for assistance.

You can also try to reset the lock’s tamper alarm by following these steps:

1. Remove the batteries from the lock.
2. Wait for 30 seconds.
3. Reinsert the batteries into the lock.
4. Enter the lock’s programming code.
5. Press the programming button once.
6. The tamper alarm will be reset.

Resetting After a Failed Code Entry

Incorrect code entry can cause the lock to become temporarily disabled.

If an incorrect code is entered 5 times in a row, the lock will enter a lockout mode for 10 minutes. During this time, no code will be accepted. After 10 minutes, the lock will reset itself and you can try again.

If you have forgotten your code or the lock is still not working after 10 minutes, you can reset the lock by removing the battery compartment cover, inserting a paperclip into the reset button hole, and pressing the reset button. This will erase all codes from the lock and you will need to reprogram it (see below).

Here are some additional tips for resetting your Kwikset lock:

Make sure that the battery is good. A weak battery can cause the lock to malfunction.
If you are still having trouble resetting your lock, you can contact Kwikset customer service for help.

Table 1: Troubleshooting Failed Code Entry
Problem	Solution
Incorrect code entered 5 times in a row	Lock enters lockout mode for 10 minutes
Lock still not working after 10 minutes	Insert paperclip into reset button hole and press
Forgotten code	Reset lock by removing battery compartment cover and pressing reset button
Weak battery	Replace battery
Still having trouble	Contact Kwikset customer service

Replacing a Dead Battery

When your Kwikset lock’s battery is dead, you’ll need to replace it to keep your lock working properly. Replacing the battery is a simple process that can be completed in a few minutes with the following steps:

1. Remove the Lock’s Cover:

The lock’s cover is typically held in place by a single screw. Use a Phillips head screwdriver to remove the screw and lift the cover off the lock.

2. Remove the Old Battery:

Once the cover is removed, you’ll see the old battery. Use a pair of pliers or tweezers to gently remove the battery.

3. Insert the New Battery:

Take the new battery and insert it into the lock, making sure to align the positive and negative terminals correctly. The positive terminal is typically marked with a “+” sign, while the negative terminal is marked with a “-” sign.

Once the battery is inserted, press down firmly to ensure it is securely in place.

Types of Batteries Compatible with Kwikset Locks

Lock Type	Battery Type
Single Cylinder Deadbolts	CR2 (3V Lithium)
Double Cylinder Deadbolts	CR2 (3V Lithium)
Levers	CR2 (3V Lithium)
Knobs	CR2 (3V Lithium)
Smart Locks	CR123A (3V Lithium)

4. Replace the Lock’s Cover:

Once the new battery is inserted, replace the lock’s cover. Tighten the screw to secure the cover in place.

5. Test the Lock:

Once the cover is replaced, test the lock to make sure it is working properly. Enter your code and the lock should unlock. If the lock does not unlock, check the battery to make sure it is inserted correctly and that the terminals are clean.

6. Program the Lock (If Necessary):

If you replaced the battery in a smart lock, you may need to reprogram the lock. Follow the instructions in the lock’s user manual to program the lock.

Lock Maintenance for Optimal Function

Ensuring the smooth operation of your Kwikset lock requires regular maintenance. By following these guidelines, you can extend the life of your lock and prevent any potential issues.

1. Clean the Lock Regularly

Dirt, grime, and other debris can accumulate on the lock’s surface and内部 components, affecting its performance. Use a soft, damp cloth to wipe down the lock and remove any dirt. Avoid using harsh chemicals or abrasive cleaners, as they can damage the lock’s finish.

2. Lubricate the Lock

Lubricating the lock’s moving parts, such as the latch and the keyhole, helps to reduce friction and ensure smooth operation. Apply a small amount of graphite powder or a specialized lock lubricant to these areas.

3. Inspect the Batteries Regularly

If you have an electronic Kwikset lock, it’s crucial to inspect the batteries on a regular basis. Dead or weak batteries can prevent the lock from functioning properly. Replace the batteries when the lock starts to show signs of low battery, such as slow locking or unlocking, or intermittent operation.

Electronic Kwikset Lock Battery Life	Estimated Battery Life
Single-Latch Deadbolt	3-5 years
Double-Latch Deadbolt	2-4 years
Smart Lock	1-2 years

Note: Battery life can vary depending on usage and environmental factors.

4. Rekey the Lock if Necessary

If you lose your keys or suspect that someone else has access to them, you should rekey the lock. This involves changing the lock’s internal mechanism so that the old keys will no longer work. It’s recommended to have a professional locksmith perform this task to ensure proper installation.

5. Avoid Overtightening Screws

When installing or adjusting the lock, be careful not to overtighten the screws. Excessive force can damage the lock’s components and affect its functionality.

6. Keep the Lock Dry

Moisture can damage the lock’s internal components and cause it to malfunction. Keep the lock dry by avoiding exposure to rain, snow, or other sources of moisture. If the lock does get wet, dry it thoroughly with a soft cloth as soon as possible.

7. Contact a Locksmith for Complex Issues

If you encounter any complex issues with your Kwikset lock, such as jammed mechanisms or electrical malfunctions, do not attempt to repair it yourself. Contact a qualified locksmith who can diagnose and resolve the problem safely and effectively.

35. Incorrect Use of SmartKey Tool

The SmartKey tool is a unique feature of Kwikset locks that allows you to rekey the lock without removing it from the door. However, incorrect use of this tool can result in a failed reset:

Inserting the SmartKey tool upside down: The SmartKey tool has a specific orientation that must be inserted correctly. If inserted upside down, it will not engage the lock’s pins and the reset process will fail.
Not fully inserting the SmartKey tool: The SmartKey tool must be fully inserted into the lock cylinder for it to make contact with the pins. If the tool is not inserted fully, it may not be able to rotate the pins and the reset will fail.
Pushing the SmartKey tool too hard: When inserting the SmartKey tool, apply gentle pressure. Pushing too hard can damage the tool or the lock’s internal components, resulting in a failed reset.
Not holding the SmartKey tool in place: Once the SmartKey tool is inserted, it must be held in place while the new key is inserted. If the tool is released prematurely, the pins may reset to their original positions and the reset will fail.
Using the wrong SmartKey tool: Different Kwikset lock models require specific SmartKey tools. Using the wrong tool may not engage the lock’s pins properly and the reset will fail.

To avoid these mistakes, carefully follow the instructions provided with the SmartKey tool and ensure that you are using the correct tool for your specific lock model.

If you encounter any difficulties using the SmartKey tool, refer to the manufacturer’s instructions or contact Kwikset customer support for assistance.

Preventing Unauthorized Access

Unauthorized access to your home can be a significant safety and security concern. Fortunately, there are several steps you can take to prevent unauthorized access and protect your property and loved ones.

One of the most effective ways to prevent unauthorized access is by installing a sturdy and reliable door lock system. Kwikset is a reputable brand known for producing high-quality locks that provide excellent security. If you have a Kwikset lock installed, resetting the code is essential to maintain the security of your home and prevent unauthorized access.

Here’s a detailed guide on how to reset the code on your Kwikset lock:

1. Gather necessary tools

Before you begin, make sure you have the following tools on hand:

A small Phillips head screwdriver
A new 9-volt battery (if your lock is battery-powered)

2. Remove the lock’s interior cover

Locate the screws that hold the interior cover of the lock in place. Using the Phillips head screwdriver, remove the screws and carefully remove the cover.

3. Locate the ‘Reset’ button

Once the interior cover is removed, you will see the ‘Reset’ button. It is typically a small, black button located near the top of the lock mechanism.

4. Press and hold the ‘Reset’ button

Use the small Phillips head screwdriver to press and hold the ‘Reset’ button. Continue holding the button for approximately 10 seconds.

5. Release the ‘Reset’ button

After 10 seconds, release the ‘Reset’ button. The lock will now be reset to its factory default settings.

6. Enter a new code

You can now enter a new code for your Kwikset lock. To do this, simply press the numbers on the keypad in the desired order.

7. Press the ‘Lock’ button

After entering the new code, press the ‘Lock’ button to save the changes.

8. Test the new code

Try entering the new code to ensure it works correctly. If the lock opens, the reset process was successful.

By following these steps, you can easily reset the code on your Kwikset lock and prevent unauthorized access to your home. Remember to keep your new code confidential and change it periodically for enhanced security.

Setting Permission Levels for Sub-Codes

In addition to creating sub-codes, you can also assign different permission levels to each sub-code. This allows you to control which users have access to certain features of your Kwikset lock, such as locking and unlocking the door, or changing the lock code.

There are three permission levels that you can assign to a sub-code:

Administrator: Administrators have full access to all features of the Kwikset lock, including the ability to create and delete sub-codes, change the lock code, and lock and unlock the door.
User: Users can lock and unlock the door using the sub-code, but they cannot change the lock code or create or delete sub-codes.
Guest: Guests can only unlock the door using the sub-code. They cannot lock the door, change the lock code, or create or delete sub-codes.

To assign a permission level to a sub-code, follow these steps:

1. Open the Kwikset app on your smartphone.
2. Tap on the “Settings” tab.
3. Tap on the “Sub-Codes” option.
4. Select the sub-code that you want to change the permission level for.
5. Tap on the “Permissions” tab.
6. Select the permission level that you want to assign to the sub-code.
7. Tap on the “Save” button.

The following table summarizes the different permission levels that you can assign to sub-codes:

Permission Level	Access
Administrator	Full access
User	Can lock and unlock door
Guest	Can only unlock door

Creating Schedules for Access Codes

Kwikset smart locks offer the convenience of creating access codes for individuals who need temporary or scheduled access to your home. The lock’s scheduling feature allows you to set specific timeframes during which the code will be active, ensuring that access is granted only when necessary.

Setting Up Access Code Schedules

Open the Kwikset app on your smartphone.
Select the lock you want to create a schedule for.
Tap on the “Access Codes” tab.
Select the existing access code you want to schedule or create a new one.
Tap on the “Schedule” tab.
Use the toggle switch to enable scheduling.
Specify the start and end time for the access code’s validity.
Select the days of the week when the code should be active.
Tap “Save” to confirm your changes.

Example

Suppose you want to give your housekeeper access to your home from Monday to Friday, between 9:00 AM and 5:00 PM. You can create an access code and set the following schedule:

Days	Start Time	End Time
Monday – Friday	09:00 AM	05:00 PM

With this schedule, the access code will be active only during the specified time and days, allowing your housekeeper to enter your home when needed.

Managing Access Code Schedules

You can easily manage access code schedules through the Kwikset app:

Edit Schedules: To edit an existing access code schedule, simply tap on it and make the necessary changes.
Disable Schedules: If you want to temporarily disable a schedule, turn off the “Schedule” toggle switch.
Delete Schedules: To remove an access code schedule completely, tap on the “Delete” button.

By taking advantage of the scheduling feature, you can grant access to your home in a controlled and secure manner, ensuring the safety and convenience of your family and trusted individuals.

Integrating Kwikset Locks with Smart Home Systems

Kwikset locks are a popular choice for smart home systems, as they are compatible with a wide range of devices and platforms. This guide will show you how to integrate your Kwikset lock with a smart home system, so you can control your lock from anywhere.

Requirements

Before you begin, you will need the following:

A Kwikset lock that is compatible with smart home systems
A smart home hub
The Kwikset app

Step-by-Step Instructions

Follow these steps to integrate your Kwikset lock with a smart home system:

1. Install the Kwikset app

The first step is to install the Kwikset app on your smartphone or tablet. The app is available for free on the App Store and Google Play.

2. Create an account

Once you have installed the app, open it and create an account. You will need to provide your email address, password, and name.

3. Add your lock

Once you have created an account, you can add your Kwikset lock to the app. To do this, tap the “+” button in the top right corner of the screen and select “Add Device.” Follow the on-screen instructions to add your lock.

4. Integrate with a smart home hub

Once you have added your lock to the Kwikset app, you can integrate it with a smart home hub. This will allow you to control your lock from the hub’s app or interface.

To integrate your lock with a smart home hub, open the hub’s app or interface and follow the on-screen instructions. You will need to provide the hub with the lock’s serial number and PIN code.

5. Control your lock

Once you have integrated your lock with a smart home hub, you can control it from the hub’s app or interface. You can lock and unlock the door, check the lock’s status, and create schedules.

Troubleshooting

If you are having trouble integrating your Kwikset lock with a smart home system, try the following troubleshooting tips:

Make sure that your lock is compatible with smart home systems.
Make sure that you are using the latest version of the Kwikset app.
Make sure that your smart home hub is compatible with Kwikset locks.
Make sure that you have entered the correct serial number and PIN code for your lock.
Try resetting your lock to factory settings.

Frequently Asked Questions

Here are some frequently asked questions about integrating Kwikset locks with smart home systems:

Can I control my Kwikset lock from anywhere?

Yes, you can control your Kwikset lock from anywhere if you have a smart home hub that is connected to the cloud.

Can I use my Kwikset lock with multiple smart home systems?

Yes, you can use your Kwikset lock with multiple smart home systems if you have a hub that supports multiple systems.

Can I use my Kwikset lock without a smart home hub?

Yes, you can use your Kwikset lock without a smart home hub, but you will not be able to control it remotely.

Conclusion

Integrating Kwikset locks with smart home systems is a great way to improve your home security and convenience. By following the steps in this guide, you can easily integrate your Kwikset lock with a smart home system and start controlling your lock from anywhere.

Resetting Codes for Accessibility Options

Assistive technology devices, such as screen readers, often require specific accessibility codes to function correctly with Kwikset locks. These codes allow for enhanced accessibility features that can assist individuals with disabilities in operating the lock. For instance, a screen reader may utilize the accessibility code to announce the lock’s status, such as whether it is locked or unlocked.

To reset the accessibility code, follow these steps:
1. Enter the current master code into the keypad.
2. Press the “Schlage” button.
3. Enter the new accessibility code (between 4 and 8 digits long).
4. Press the “Schlage” button again to save the new accessibility code.

**Detailed Explanation of Step 4:**
When pressing the “Schlage” button in step 4, the lock will emit a series of beeps. The number of beeps corresponds to the length of the accessibility code being programmed. For example, if you entered a 4-digit accessibility code, the lock will beep four times. If the code is successfully programmed, the lock will emit a solid green light. If the code is not successfully programmed, the lock will emit a solid red light.

Here’s a table summarizing the number of beeps and the corresponding code length:

Number of Beeps	Code Length
1	1 digit
2	2 digits
3	3 digits
4	4 digits
5	5 digits
6	6 digits
7	7 digits
8	8 digits

By following these steps, you can effectively reset the accessibility code for your Kwikset lock, ensuring optimal compatibility with assistive technology devices.

Creating Codes for Caregivers

As a homeowner, you may find it necessary to grant temporary access to your home for caregivers or other trusted individuals. Kwikset locks offer a convenient way to create unique codes for these individuals, providing them with access to your home without having to share your master code.

Step 42: Assign a Code

Once you have entered the programming mode, it’s time to assign a code to the caregiver. Follow these steps carefully:

Press the # key once.
Enter a 6-digit code of your choice using the numeric keypad.
Press the # key again to confirm the code.

It’s important to choose a code that is both memorable and secure. Avoid using obvious sequences like “123456” or your birthdate. Instead, opt for a combination of numbers and letters, or use a phrase or word that is meaningful to you.

To ensure the security of your code, consider the following tips:

Do not share your code with anyone other than the intended caregiver.
Change the code regularly, especially if you suspect it may have been compromised.
Keep a record of all assigned codes in a secure location.

Code Types

Kwikset locks offer two types of codes: permanent and temporary.

Permanent Codes: These codes remain active until they are deleted or overwritten. They are typically assigned to family members or trusted individuals who require ongoing access to your home.
Temporary Codes: These codes are assigned for a specific duration, such as a week or a month. They are ideal for caregivers or other temporary visitors who only need access for a limited period.

Temporary codes are a convenient way to grant access without compromising the security of your permanent codes. They also provide you with peace of mind, knowing that you can easily revoke access once the caregiver’s services are no longer required.

Code Type	Duration	Usage
Permanent	Indefinite	Family members, trusted individuals
Temporary	Specified duration	Caregivers, temporary visitors

Resetting Codes for Home Security

Every homeowner understands the importance of securing their property and belongings, and one of the most crucial aspects of home security is the door lock. Kwikset, a leading manufacturer of residential door hardware, offers a range of locks that provide advanced security and convenience.

Understanding Kwikset Lock Codes

Kwikset locks typically operate using a programmed code. This code can be a combination of digits or letters, and it allows authorized individuals to unlock the door without the need for a physical key. The code is usually set at the factory, but homeowners can customize it to enhance security and personalize their access system.

Reasons for Resetting Kwikset Lock Codes

There are several reasons why you may need to reset the code for your Kwikset lock:

Lost or forgotten code:

If you have lost or forgotten the current code, you will need to reset the lock to regain access to your property.

Security concerns:

If you suspect that your code has been compromised or shared with unauthorized individuals, it is crucial to reset the code promptly to prevent unauthorized access.

New occupants:

When moving into a new home or renting out a property, it is advisable to reset the lock code to ensure that only authorized individuals have access.
li>Lock malfunction: In some cases, the lock may not be functioning correctly due to a software glitch or hardware issue. Resetting the code can often resolve these malfunctions.

🛠 How To Reset Kwikset Lock Code

The specific steps for resetting a Kwikset lock code vary depending on the model and type of lock.

However, the general procedure involves these steps:

1. Gather Materials

Before starting the reset process, gather the following materials:

Your Kwikset lock
A small screwdriver or Torx key (if required)
The new code you want to program

2. Prepare the Lock

Depending on your Kwikset lock model, you may need to remove the faceplate or backplate to access the reset button or programming mechanism. Consult the user manual or online resources for specific instructions.

3. Reset Using the Programming Button

Many Kwikset locks feature a dedicated programming button that allows you to reset the code. Locate the programming button inside the lock housing and press it using a small screwdriver or Torx key.

4. Reprogramming the Lock

Once you have initiated the reset process, follow the specific instructions for your lock model to enter the new code.

For example, some Kwikset locks require you to press the programming button multiple times and then enter the new code using the keypad. Refer to the table below for specific instructions based on your lock model:

Lock Model	Reprogramming Instructions
Kwikset SmartCode	Press the programming button 3 times. Enter the new 6-digit code using the keypad and press the “lock” button.
Kwikset Kevo	Remove the backplate. Press and hold the programming button for 10 seconds. Enter the new 6-digit code using the provided keyfob.
Kwikset Obsidian	Remove the faceplate. Press the programming button 5 times. Enter the new 4-digit code using the keypad and press the “lock” button.

After entering the new code, the lock will beep or light up to indicate successful programming.

5. Test the New Code

Once you have reset the code, test it by entering the new code on the keypad. The lock should unlock correctly if the reset was successful.

6. Secure the Lock

After verifying that the new code works, secure the lock by reinstalling the faceplate or backplate (if removed during the reset process).

Remember to keep the new code confidential and store it in a secure location for future reference. If you encounter any difficulties during the reset process, refer to the user manual or contact Kwikset customer support for assistance.

Resetting Codes for Vacation Security

Going on vacation is a great time to relax and rejuvenate, but it can also be a time of worry about the security of your home. One way to help ease your mind is to reset the codes on your Kwikset lock before you leave. This will ensure that only you and the people you trust have access to your home while you’re away.

Benefits of Resetting Your Codes

There are several benefits to resetting your Kwikset lock codes before you go on vacation, including:

It prevents unauthorized access to your home. If someone has managed to obtain your old code, resetting it will prevent them from being able to enter your home while you’re away.
It gives you peace of mind. Knowing that your home is secure will help you to relax and enjoy your vacation more.
It’s a quick and easy process. Resetting your Kwikset lock codes takes just a few minutes, so it’s a small investment of time that can be well worth it.

How to Reset Your Codes

Resetting your Kwikset lock codes is a simple process that can be completed in just a few minutes. Here are the steps:

Enter your current master code. This is the code that you use to unlock your door.
Press the “Prog” button. This button is located on the inside of the lock.
Enter your new master code. This is the code that you will use to unlock your door from now on.
Press the “Prog” button again.
Your new master code is now set.

You can also reset your user codes using the same process. Simply enter the user code that you want to reset, followed by the “Prog” button, followed by the new user code, followed by the “Prog” button again.

Managing Codes for Pet Care

If you’re a pet owner, you know that there are times when you need to leave your furry friend home alone. Whether you’re going to work, running errands, or just taking a break, it’s important to make sure that your pet is safe and secure. One way to do this is to use a Kwikset lock with a keypad entry. This allows you to give your pet sitter or dog walker a code to enter your home, so they can care for your pet without having to have a key.

Here are some tips for managing codes for pet care:

Choose a strong code. The code you choose should be easy for you to remember, but difficult for others to guess. Avoid using simple codes like “1234” or “0000”.
Give your code only to trusted people. Only give your code to people who you trust to care for your pet. This includes pet sitters, dog walkers, and family members or friends who may need to check on your pet while you’re away.
Change your code regularly. It’s a good idea to change your code every few months, or whenever you think someone else may have learned it. This will help to keep your home and your pet safe.
Keep your code confidential. Don’t write your code down or share it with anyone other than the people who need to know it. If your code is compromised, you should change it immediately.
Test your code regularly. Make sure that your code works by testing it every few weeks. This will ensure that you can always get into your home, even if you forget your key.

Here are some additional tips for using a Kwikset lock with a keypad entry for pet care:

Use a pet-friendly door. If you have a pet, make sure that the door you’re using for your Kwikset lock is pet-friendly. This means that the door should be wide enough for your pet to get through, and it should be easy for them to open.
Train your pet to use the door. If your pet is not used to using a door with a keypad entry, you will need to train them. Start by teaching them to push on the door to open it. Once they have mastered this, you can start teaching them to use the keypad.
Be patient. It may take some time for your pet to learn how to use the keypad. Be patient and consistent with your training, and eventually they will get it.

By following these tips, you can use a Kwikset lock with a keypad entry to safely and securely care for your pet while you’re away.

Resetting Codes for Delivery Services

If you need to grant temporary access to your home for delivery services, you can create a unique code that expires after a certain period of time. This ensures that the delivery person does not have ongoing access to your home.

Here are the steps on how to reset the codes for delivery services:

1. Access the Programming Mode

Press the Schlage button on the keypad and enter the master code. The default master code is usually “1234”.

2. Navigate to the Delivery Mode

Press the “*” key to enter the programming mode. Then, press the “4” key to select the “Delivery Mode”.

3. Enter the Temporary Code

Enter the temporary code that you want to use for delivery services. The code can be any combination of 1 to 6 digits.

4. Set the Expiration Time

Press the “*” key to confirm the temporary code. Then, press the “4” key to set the expiration time. You can choose from the following options:

Option	Expiration Time
1	1 hour
2	2 hours
3	3 hours
4	4 hours
5	5 hours
6	6 hours
7	7 hours
8	8 hours
9	9 hours
10	10 hours
11	11 hours
12	12 hours
13	13 hours
14	14 hours
15	15 hours
16	16 hours
17	17 hours
18	18 hours
19	19 hours
20	20 hours
21	21 hours
22	22 hours
23	23 hours
24	24 hours

Note: If you choose the “0” option, the temporary code will never expire.

5. Confirm the Settings

Press the “#” key to confirm the settings. The lock will beep to indicate that the delivery code has been set.

6. Test the Code

To test the delivery code, enter the code on the keypad and press the “#” key. The door should unlock. Once the expiration time is reached, the code will no longer work.

7. Delete the Code (Optional)

If you want to delete the delivery code, press the Schlage button on the keypad, enter the master code, and then press the “*” key. Select the “Delivery Mode” and press the “4” key to delete the code.

Resetting Codes for Airbnb Rentals

When renting out your Airbnb property, it’s important to have a system in place for managing guest access. One way to do this is by using Kwikset smart locks. These locks allow you to create unique codes for each guest, which they can use to enter the property during their stay.

If you need to reset the code for an Airbnb rental, follow these steps:

Remove the battery cover. The battery cover is located on the back of the lock. Use a screwdriver to remove the screws that hold it in place.
Remove the batteries. Once the battery cover is removed, you will see the batteries. Remove them from the lock.
Wait 30 seconds. This will allow the lock to reset.
Reinsert the batteries. Make sure that the positive and negative terminals of the batteries are aligned correctly.
Replace the battery cover. Screw the battery cover back into place.
Enter the new code. Once the battery cover is replaced, you will need to enter the new code. Use the keypad to enter the code, then press the “#” key.

The new code will now be active. You can give this code to your guests so that they can access the property during their stay.

Here are some additional tips for resetting codes for Airbnb rentals:

Use a strong code. The code that you choose should be strong and difficult to guess. Avoid using simple codes like “1234” or “0000”.
Change the code regularly. It’s a good idea to change the code for your Airbnb rental regularly. This will help to keep your property secure.
Keep the code confidential. Do not share the code with anyone other than your guests. If the code is compromised, it could give someone unauthorized access to your property.

48. Troubleshooting

If you are having trouble resetting the code for your Kwikset lock, there are a few things that you can try:

Make sure that the batteries are fresh. Weak batteries can cause the lock to malfunction.
Check the keypad. Make sure that the keypad is clean and that all of the buttons are working properly.
Reset the lock to factory settings. This will erase all of the codes that have been stored on the lock. To reset the lock to factory settings, follow these steps:
- Remove the battery cover.
- Remove the batteries.
- Press and hold the “Prog” button for 10 seconds.
- Reinsert the batteries.
- Replace the battery cover.
Contact Kwikset customer support. If you are still having trouble resetting the code for your Kwikset lock, you can contact Kwikset customer support for assistance.

48.1. Error Codes

If you see an error code on the display of your Kwikset lock, it means that there is a problem with the lock. The following table lists the most common error codes and their meanings:

Error Code	Meaning
E1	The code that you entered is incorrect.
E2	The lock is jammed.
E3	The batteries are low.
E4	The lock is not properly installed.
E5	There is a problem with the keypad.
E6	The lock is in lockout mode.

If you see an error code on the display of your Kwikset lock, try the following:

Make sure that the code that you entered is correct.
Check the lock for any obstructions.
Replace the batteries.
Reinstall the lock.
Contact Kwikset customer support.

Resetting Codes for Shared Workspaces

When managing access to shared workspaces, it’s crucial to ensure the security and functionality of your Kwikset locks. In such environments, where multiple users may come and go, it’s essential to have a streamlined process for resetting lock codes to maintain control and facilitate smooth transitions.

1. Determine Accessibility

Before you initiate the reset process, it’s important to determine whether you have physical access to the lock in question. If you do not have direct access, you may need to coordinate with the current users or seek assistance from the building management.

2. Resetting the Lock Code

Once you have physical access to the lock, follow these steps to reset the lock code:

Enter the current user code.
Press the “Program” button once.
Press the “1” button.
Enter the new user code (6-8 digits).
Press the “Program” button again to confirm.

3. Verifying the Reset

To verify that the lock code has been successfully reset, attempt to unlock the door using the new user code. If the door unlocks, the reset has been completed.

4. Deleting Old Codes

If you wish to delete old user codes from the lock, follow these steps:

Enter the current user code.
Press the “Program” button once.
Press the “2” button.
Enter the user code you want to delete.
Press the “Program” button again to confirm.

5. Tips for Shared Workspaces

To enhance the security and convenience of Kwikset lock management in shared workspaces, consider the following tips:

Establish a clear policy for resetting lock codes and communicate it to all authorized users.
Maintain a log of all user codes and their corresponding users for accountability and tracking purposes.
Consider using a master code that overrides all other user codes, allowing for emergency access or administrative changes.
Periodically review the user codes and delete any inactive or obsolete codes to prevent unauthorized access.
Educate users on the importance of keeping their codes confidential and reporting any suspected compromises immediately.

6. Additional Considerations

In addition to the above guidelines, keep the following considerations in mind when resetting Kwikset lock codes:

If you encounter any difficulties during the reset process, refer to the lock’s user manual or contact Kwikset customer support for assistance.
Ensure that you have the correct user code before attempting to reset the lock.
If the lock is not responding to your commands, check the batteries or consider replacing them.
Keep the lock clean and free of debris to ensure proper operation.

7. Troubleshooting

If you encounter any issues while resetting your Kwikset lock code, refer to the following troubleshooting tips:

Lock is not responding: Check the batteries or replace them.
Incorrect user code: Verify that you are using the correct user code.
Reset not completing: Ensure that you are following the reset steps correctly and hold the “Program” button until the lock beeps to confirm.
Code not working after reset: Re-enter the new user code to verify its functionality.

8. Security Enhancements

For enhanced security, consider implementing the following measures:

Use strong, unique user codes that are not easily guessed.
Avoid using sequential or easily identifiable codes.
Change user codes regularly to prevent unauthorized access.
Consider using a Kwikset lock with advanced security features, such as the SmartKey technology that allows for easy re-keying.

9. Support and Resources

For further assistance or technical support, refer to the following resources:

Kwikset Customer Support: 1-800-327-LOCK (5625)
Kwikset Website: https://www.kwikset.com/
Kwikset User Manuals: https://www.kwikset.com/support/manuals-guides

10. Conclusion

By following these guidelines and tips, you can effectively reset Kwikset lock codes in shared workspaces, ensuring seamless access management and maintaining the security of your premises.

How To Reset Kwikset Lock Code

The Kwikset lock code can be reset using two methods: using the keypad or using the reset button. The keypad method is the simplest and can be done by anyone. To reset the lock code using the keypad, follow these steps:

Enter the incorrect code five times.
The lock will now be in lockout mode and will beep continuously.
Press the “Prog” button, located on the inside of the lock next to the battery compartment.
Enter a new six-digit code.
Press the “Prog” button again to save the new code.

Alternatively, you can use the reset button to reset the lock code. To do so, follow these steps:

Remove the battery cover from the inside of the lock.
Find the reset button, located next to the battery compartment.
Press and hold the reset button for five seconds.
The lock will now be reset to the factory default code of 1234.

Understanding Kwikset Lock Codes

Types of Kwikset Lock Codes

Master Code Format

User Code Format

Default Master Code

Changing the Master Code

Creating and Deleting User Codes

Resetting the Master Code

Resetting a Sub-Code

Detailed Guide:

Additional Information:

The Importance of Writing Down Codes

Step 1: Gather your materials

Step 2: Find the reset button

Step 3: Press the reset button

Step 4: Program a new code

Step 5: Test your new code

Step 6: Write down your new code

Resetting Without the Master Code

Remove the lock from the door.

Locate the reset button.

Hold the reset button for 10 seconds.

Reprogram the lock.

Reinstall the lock.

Considerations

Additional Tips

Troubleshooting Resetting Issues

Ensure You Are Using the Correct Master Code

Check the Batteries

Remove the Deadbolt

Contact Kwikset Support

Other Troubleshooting Tips

Resetting Steps for Kwikset Lock

Assigning New Sub-Codes

Example Scenario:

Tips:

Additional Notes:

Factory Resetting a Keypad Lock

1. Remove the battery cover

2. Remove the batteries

3. Press and hold the reset button

4. Reinsert the batteries

5. Replace the battery cover

6. Enter the default code

7. Create a new code

8. Test the new code

9. Troubleshooting

10. Additional information

Resetting a Turn-Key Deadbolt

Detailed Step-by-Step Instructions

Step 1: Prepare the Lock

Step 2: Remove the Faceplate

Step 3: Locate the Reset Button

Step 4: Reset the Lock

Step 5: Lock the Door

Step 6: Release the Reset Button

Step 7: Test the Lock

Additional Notes

Choosing a New Master Code

Resetting Kwikset Lock Code

1. Gather Necessary Tools

2. Identify Lock Type

3. Remove Battery Cover

4. Access Programming Buttons

5. Enter Factory Code

6. Change Lock Code

7. Reconnect Battery

8. Test New Code

9. Reset Failed?

Using Strong and Long Passwords

10. Importance of Strong Passwords

11. Characteristics of a Strong Password

12. Common Password Attacks

13. Generating Strong Passwords

14. Tips for Choosing a Long Password

Keeping Codes Confidential

Resetting Multiple Locks Simultaneously

Managing Codes for Multiple Users

1. Determine the Number of Users

2. Create a Master Code